Install N920TUVU1BOH4 / UVU1BOH4 On T-Mobile Samsung Galaxy Note 5 SM-N920T

N920TUVU1BOH4 / UVU1BOH4 Android 5.1.1 Lollipop is available now after Samsung launched it this week to deliver official update for the T-Mobile Samsung Galaxy Note 5 SM-N920T phoneblet. Those who have the phoneblet in hand can now upgrade their existing software version and enjoy the best experience and stabler performance at maximum level.

Advertisements.

And as usual Install Android ROMs blog provides the complete instructions to flash the official firmware manually to the users who have not been notified either via Samsung KIES or System Update (OTA). Of course as parts of the instructions Install Android ROMs also provides the firmware file that can be downloaded and the Odin tool to be used in installing the firmware to the Samsung Galaxy phoneblet.

The manual installations requires you to have a computer and a USB cable because you will need them to connect and flash the firmware. So make sure you have them, or else you will not be able to follow the instructions from below section, and then your root access will be wiped out because this firmware will restore your device.

Preconditions.

• Be sure you only flash the N920TUVU1BOH4 / UVU1BOH4 Android 5.1.1 Lollipop on T-Mobile Samsung Galaxy Note 5 SM-N920T device not on other models.
• Be sure your Windows OS based PC and USB cable are working.
• Be sure you have enabled USB debugging mode of your T-Mobile Samsung Galaxy Note 5 SM-N920T phoneblet.
• Be sure you have made necessary backups over your important data that are currently stored on your Android powered device.
• Be sure you disable both your antivirus and Samsung KIES installed on your PC.
• Be sure you follow the instructions entirely that means you will not skip any steps.
• Be sure you have known that your existing custom recovery image (If your device is powered by it) will be replaced with a stock recovery.
Advertisements.

Download and unzip these files to your beloved PC.

• Download N920TUVU1BOH4 / UVU1BOH4 Android 5.1.1 Lollipop firmware.
• Download Odin3 v3-07 (If in your computer has Odin, then no need to download it again, just skip this).

How to install N920TUVU1BOH4 / UVU1BOH4 Android 5.1.1 Lollipop on the T-Mobile Samsung Galaxy Note 5 SM-N920T

1. Turn your phoneblet off to enter to Download Mode, just use these three buttons; Volume Down + Home + Power.
2. If you see a warning like on the picture below just use Volume Up.
   
   
3. Launch Odin now if your device is already in Download Mode.
   
   
4. You can now connect your device to PC to let Odin detecting it.
5. Added!!! notification on message box as an indication that your device is recognized by Odin.
   
   
6. Click the AP (For Odin3 v3.09 or newer) or tap the PDA (For Odin3 v3.07) button to search the firmware unzipped on your PC the firmware comes with .tar.md5 extension.
   
   
7. Click Start button now and let other options unchecked to flash N920TUVU1BOH4 / UVU1BOH4 Android 5.1.1 firmware on your smart device.
   
   
8. PASS notification (Look the picture below as a reference) will appear if Odin has successfully installed the firmware on your device.
   
   
9. Restart the T-Mobile Samsung Galaxy Note 5 SM-N920T device of yours to complete the installation phases.

Fix bootloop and other errors.

If your device is unable to boot normally then you can perform a factory reset via Recovery Mode, doing so will fix the problem at the same time erase your data, so make sure you have made backups before performing this action.

Well done now the Android powered device in your hand has been upgraded to the more stable and improved official software. Hope you find this post useful. And tell your friends about this okey?

Install N900W8VLU2DOH1 Android 5.0 Firmware On Samsung Galaxy Note 3 SM-N900W8

Samsung just rolled out N900W8VLU2DOH1 (VLU2DOH1) bringing the optimized Android 5.0 Lollipop for the Samsung Galaxy Note 3 SM-N900W8 phone. You should grab this update immediately because it comes with optimizations to smooth your device performance and improve its stability with bug-fixes included within this firmware update.

Advertisements.

Those who own the phone can now check its availability through System Update (OTA) feature directly on their device, or you can also use the Samsung KIES software installed on your computer by simply connecting your phone using a USB cable. Keep checking its availability, the activity could take sometimes, because it's rolling to a certain regions that are supported by the firmware.

Or you can use the manual installations, lucky you because this post contains the full installation procedures to bring the VLU2DOH1 (N900W8VLU2DOH1) firmware to your Samsung Galaxy Note 4 device, so if you are interested then you are invited to follow the instructions that come with the download link for the firmware and Odin tool.

Preconditions.

• Do not flash the N900W8VLU2DOH1 firmware if your device is not Samsung Galaxy Note 3 SM-N900W8.
• If your phone has a root access, then this firmware will restore its kernel, to which will delete your root access.
• If your device is optimized with a custom recovery then this firmware will replace it with a stock recovery image.
• Prepare your Windows OS PC and USB cable because they're needed to connect your device and flash the firmware.
• You also need to enable USB debugging mode of your Samsung Galaxy Note 3 SM-N900W8.
• Your Samsung KIES and antivirus installed on your PC should temporarily be disabled because they will prevent Odin from running.
• Backup all the data you regard very precious before proceeding.
• Follow each step written on the tutorials below.
• Just want to say good luck guys.

Download and unzip these files to your beloved PC.

• Download N900W8VLU2DOH1 (VLU2DOH1) Android 5.0 Lollipop firmware.
• Download Odin3 v3-07 (If in your computer has Odin, then no need to download it again, just skip this).

How to install N900W8VLU2DOH1 (VLU2DOH1) Android 5.0 Lollipop on the Samsung Galaxy Note 3 SM-N900W8

1. Your device should be entering the Download Mode. Do so by simply turning it off, afterward press the Volume Down + Home + Power keys altogether.
2. Now you will see a warning message comes out, just press the Volume Up after your finger release those three buttons.
   
   
3. Now open Odin when your Samsung Galaxy Note 3 SM-N900W8 has entered the Download Mode.
   
   
4. Now connect your phone to computer using your USB cable.
5. Added!!! notification can be seen on the message box if your device has been successfully identified by Odin.
   
   
6. Click the AP (For Odin3 v3.09 or newer) or tap the PDA (For Odin3 v3.07) button to search the firmware you unzipped previously on PC, usually it has .tar.md5 extension.
   
   
7. Click Start button to get Odin flashing the firmware to your Samsung Galaxy Note.
   
   
8. PASS appear after the flashing process indicating that the firmware has been flashed successfully.
   
   
9. Restart your Samsung Galaxy Note 3 SM-N900W8 device now.

Fix bootloop and other errors.

Just perform the factory reset to fix bootloop so your device can boot in normal mode.

Finish and enjoy the new and more optimized firmware powering your Android OS based device.

Root T-Mobile LG G4 H811 10H Phone

Here is a full instructions to root T-Mobile LG G4 H811 10H phone, if you happen to own this superb device, then you are invited to follow them so your device can have root access that will certainly benefit you to further boost up its performance to the level of your wishes and you can also play with tremendous root tweaks to double performance your device.

Advertisements.

But remember that rooting can give a negative effect to you, the unavoidable effect is losing your device's warranty, that means there is no free service you will enjoy later in case you need a technical assists from LG. But do not be worry because you can also bring back your nullified warranty but simply un-root your device.

Those who with T-Mobile LG G4 H811 10H smartphone on their hand are invited to peruse the rooting instructions but read the preconditions first.

Preconditions.

• The rooting process requires a computer based on Windows OS and a USB cable.
• You are required to also enable your T-Mobile LG G4 H811 10H USB debugging mode.
• Be sure to follow each step without skipping any step to make sure that you will be success.
• Those whose their battery power is low can charge the phone's battery before proceeding.
• You will also need to backup all your precious data.

Advertisements.

How to root T-Mobile LG G4 H811 10H without unlock bootloader

Download these files and unzip them to your computer.

• Download LG Root file to your PC.
• Download T-Mobile LG G4 H811 10H tar.gz.

Instructions.

1. Transfer this file system.rooted.phonemodel.img file (After the tar.gz was unzipped) to your device's root internal SD card using MTP mode.
2. Afterward boot your device to the Download Mode. Do so by powering off your phone then press Volume Up and then connect your phone to computer.
3. The drivers installations will begin, just wait guys, okey?
4. Once the drivers was installed successfully, double click on the ports.bat inside LG_Root folder (This activity will provide us COM port).
   
   
5. Now get into the LG_Root folder then press shift button and right click on UPDATE SUPERSU to choose Open command window here.
   
   
6. Now copy + paste this command while your phone's Download Mode, change the COM4 with your COM number found in COM port.
   • Send_Command.exe \\.\COM4
7. Type id and hit enter on your keyboard.
8. Now you need to execute this command.
   • dd if=/data/media/0/rootedsystem.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
9. Then just wait and you'll get a “#” prompt. That means the rooting process has been done.
10. Then type LEAVE and enter. Your device will reboot, then it is also rooted.

Done.

Instructions To Root LG G4 H810PR AT&T 10A

You can now root LG G4 H810PR AT&T 10A without the need to unlock your device bootloader, the steps to do are written completely and correctly on this post for you to follow. Make sure you prepare everything necessary before starting to root your LG G4 H810PR phone so you won't miss anything important in the process of rooting.

Advertisements.

Be sure you know that rooting will nullify your device's warranty if it's still valid, and there is a chance you end up bricking your device, if that happens then all the risks are yours to bear, blame not anyone except yourself for such tragedy. However root access comes with so many benefits you can enjoy and you will likely love the benefits.

If you are interested then proceed to the full rooting instructions but please to firstly read the following preconditions first.

Preconditions.

• Your Windows OS computer and a USB cable should be ready to use.
• Backup all your precious data before beginning.
• Do not forget to firstly make your device's USB debugging mode enabled.
• The rooting instructions below need to be followed in a whole.
• If your battery power is low then charge it first to avoid a sudden shut down during the rooting process.

Advertisements.

How to root LG G4 H810PR AT&T 10A without unlock bootloader

Download these files and unzip them to your computer.

• Download LG Root file to your PC.
• Download LG G4 H810PR AT&T 10A tar.gz.

Instructions.

1. Transfer this file system.rooted.phonemodel.img file (After the tar.gz was unzipped) to your device's root internal SD card using MTP mode.
2. Afterward boot your device to the Download Mode. Do so by powering off your phone then press Volume Up and then connect your phone to computer.
3. The drivers installations will begin, just wait guys, okey?
4. Once the drivers was installed successfully, double click on the ports.bat inside LG_Root folder (This activity will provide us COM port).
   
   
5. Now get into the LG_Root folder then press shift button and right click on UPDATE SUPERSU to choose Open command window here.
   
   
6. Now copy + paste this command while your phone's Download Mode, change the COM4 with your COM number found in COM port.
   • Send_Command.exe \\.\COM4
7. Type id and hit enter on your keyboard.
8. Now you need to execute this command.
   • dd if=/data/media/0/rootedsystem.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
9. Then just wait and you'll get a “#” prompt. That means the rooting process has been done.
10. Then type LEAVE and enter. Your device will reboot, then it is also rooted.

Done.

How To Root LG G4 H815 10C Without Unlock Bootloader

Again we are delivering to you guys the rooting instructions for LG G4 series, this time the LG G4 H815 10C gets the honor to be explored by us by installing the root file so it can have root access to the most deep system core of the device. Well having a root access has so many benefits for each Android powered phone user, because they can play nearly without any limits to optimize their device to the level of their dream.

Advertisements.

And in this post I would like to help you actualize your dream by providing the complete rooting instructions for you to follow. We will be using root file developed and released by a third party Android developer who happens pouring his attentions to optimize number of LG devices. We should thanks the XDA developer member for his tool.

So now if you are ready to root your LG G4 H815 1OC phone then you can prepare everything needed and firstly read the following preconditions.

Preconditions.

• Make sure you have a working Windows OS based computer and a working USB cable.
• Before doing anything, make necessary backups, do it guys.
• You need to also enable USB debugging mode of your LG G4 H815 10C.
• Do not skip any step just follow the instructions entirely.
• You need to also charge your battery if its power is low.

Advertisements.

How to root LG G4 H815 10C without unlock bootloader

Download these files and unzip them to your computer.

• Download LG Root file to your PC.
• Download LG G4 H815 10C tar.gz.

Instructions.

1. Transfer this file system.rooted.phonemodel.img file (After the tar.gz was unzipped) to your device's root internal SD card using MTP mode.
2. Afterward boot your device to the Download Mode. Do so by powering off your phone then press Volume Up and then connect your phone to computer.
3. The drivers installations will begin, just wait guys, okey?
4. Once the drivers was installed successfully, double click on the ports.bat inside LG_Root folder (This activity will provide us COM port).
   
   
5. Now get into the LG_Root folder then press shift button and right click on UPDATE SUPERSU to choose Open command window here.
   
   
6. Now copy + paste this command while your phone's Download Mode, change the COM4 with your COM number found in COM port.
   • Send_Command.exe \\.\COM4
7. Type id and hit enter on your keyboard.
8. Now you need to execute this command.
   • dd if=/data/media/0/rootedsystem.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
9. Then just wait and you'll get a “#” prompt. That means the rooting process has been done.
10. Then type LEAVE and enter. Your device will reboot, then it is also rooted.

Done.

Root LG G4 SPRINT LS991 Instructions

LG G4 SPRINT LS991 phone can now be rooted, after the rooting tool for the said device is available now developed and maintained by an XDA developer forum member. You can get the root access now and enjoy the benefits offered. And in this post you will be guided correctly and completely to bring root access for the 5.5 inch display smartphone.

Advertisements.

If you are interested then you can continue reading the post to further read the elaborated instructions from below.

But before you do that, I invite you to firstly read the following preconditions, this is useful to know what to do beforehand.

Preconditions.

• Prepare your Windows OS PC and a USB cable.
• You must backup your data regarded important.
• Do not forget to firstly enable your LG G4 Sprtin USB debugging mode.
• Remember to follow the entire tutorials without skipping any step.
• If your battery power is low then charge it first.

Advertisements.

How to root LG G4 SPRINT LS991

Download these files and unzip them to your computer.

• Download LG Root file to your PC.
• Download LG G4 SPRINT LS991 tar.gz.

Instructions.

1. Transfer this file system.rooted.phonemodel.img file (After the tar.gz was unzipped) to your device's root internal SD card using MTP mode.
2. Afterward boot your device to the Download Mode. Do so by powering off your phone then press Volume Up and then connect your phone to computer.
3. The drivers installations will begin, just wait guys, okey?
4. Once the drivers was installed successfully, double click on the ports.bat inside LG_Root folder (This activity will provide us COM port).
   
   
5. Now get into the LG_Root folder then press shift button and right click on UPDATE SUPERSU to choose Open command window here.
   
   
6. Now copy + paste this command while your phone's Download Mode, change the COM4 with your COM number found in COM port.
   • Send_Command.exe \\.\COM4
7. Type id and hit enter on your keyboard.
8. Now you need to execute this command.
   • dd if=/data/media/0/rootedsystem.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
9. Then just wait and you'll get a “#” prompt. That means the rooting process has been done.
10. Then type LEAVE and enter. Your device will reboot, then it is also rooted.

Done.

Root LG G4 H812 Canadian Without Unlock Bootloader

Root LG G4 H812 Canadian without unlock bootloader. Those of you who have been waiting to root Lg G4 H812 Canadian Variant can now actualize your hope, and the rooting method for the said device is now available and the rooting process doesn't require you to unlock Bootloader of your LG G4 H812 phone. Once your device is rooted, then you can further perform the series of tremendous activities and enjoy great things afterward.

Advertisements.

And Install Android ROMs blog will provide the complete steps to deliver root access to your Canadian based LG G4 H812 without unlock bootloader, the process require you to use computer and MTP mode while all the needed files are provided for you to download. If you are interested then you are welcomed to follow the manual rooting instructions below.

If you are interested then you can follow the compiled guides to root Lg G4 H812 Canadian Variant without bootloader unlocking.

Advertisements.

Preconditions.

• Have a computer with a USB cable.
• Backup all your data guys.
• Enable your LG G4 H812 USB debugging mode.
• Follow the instructions without skipping anything.
• Charge your battery percentage if it's too low.

How to root LG G4 H812 CANADIAN VARIANT without unlock bootloader

Download these files and unzip them to your computer.

• Download LG Root file to your PC.
• Download LG G4 H812 Canadian Variant tar.gz.

Instructions.

1. Transfer this file system.rooted.phonemodel.img file (After the tar.gz was unzipped) to your device's root internal SD card using MTP mode.
2. Afterward boot your device to the Download Mode. Do so by powering off your phone then press Volume Up and then connect your phone to computer.
3. The drivers installations will begin, just wait guys, okey?
4. Once the drivers was installed successfully, double click on the ports.bat inside LG_Root folder (This activity will provide us COM port).
   
   
5. Now get into the LG_Root folder then press shift button and right click on UPDATE SUPERSU to choose Open command window here.
   
   
6. Now copy + paste this command while your phone's Download Mode, change the COM4 with your COM number found in COM port.
   • Send_Command.exe \\.\COM4
7. Type id and hit enter on your keyboard.
8. Now you need to execute this command.
   • dd if=/data/media/0/rootedsystem.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
9. Then just wait and you'll get a “#” prompt. That means the rooting process has been done.
10. Then type LEAVE and enter. Your device will reboot, then it is also rooted.

Done.