smartwatches compared by price tag,screen, size and speed

Smartwatches | SpecOut

 

The Samsung Gear S 2 ( known has Samsung de Grisnogono) is among the best smartwatch money can buy and make up the impressive line of the  top 3 most expensive smartwatch from the Samsung Stable with a retail price of $15,000. Next in line is Apple watch 38mm edition packing a screen size of $1.32 inches which retails at a price of $10,000 .The Kairos Hybrid SSW158 forms the mid segment and retails at $2250 price tag with the CPU speed of 120 MHz .The Swiss watch giants first entry into the wearables started with its entry level Tag Heuer Connected, which retails at $1500, with a analog display packing 1024mb of ram with an impressive CPU speed of 1200 Mhz

In the sub $1000 wearables smartwatch market,Mondaine Helvetica No 1 and Movado BOLD Motion 3660001 retails at $865 and $695 .The Huawei watch jewel is one of the smartest buys in the sub $1000 market and packs 512mb of RAM along with a CPU that runs in full throttle at 1200 Mhz

samsung's 14% smartwatches market share,sets to chase apples 52% smartwatch domination

 Apple leads  across Smartwatches Shipments  with  over 52% marketshare in 2016, followed by Samsung who is left far behind  with 16%  smartwatches "wearables  market share".According to strategy analytics report ,the last 2  years has seen Apple's smartwatch share in the wearble market come down gradually from  70% in 2015 .

. Recent Businessinsider report estimates smartwatch shipments will rise by a compound annual rate of 41% over the next five years. Smartwatches will account for 59% of total wearable device shipments this year, and that share will expand to just over 70% of  the $126million shipments by 2019.

Install UBU1BPG1 (A710MUBU1BPG1) On Galaxy A7 A710M (2016)

Learn to update Samsung Galaxy A7 A710M (2016) to UBU1BPG1 / A710MUBU1BPG1 Android 6.0.1 Marshmallow firmware from this post.

Samsung has released Android 6.0.1 Marshmallow officially to Samsung Galaxy A7 A710M (2016) under build number; UBU1BPG1 (A710MUBU1BPG1) firmware.

Advertisements.

You can update to the A710MUBU1BPG1 firmware right now. And if your device's not rooted or not powered with a custom ROM then you should be notified either via Samsung KIES or OTA.

But if you don't receive any update notifications then you can flash UBU1BPG1 software manually. And it takes only the firmware file and Odin as flashing tool.

And of course your root access will be wiped for installing this firmware. But don't worry you can root your device later.

This firmware is fully equipped with great features and performance improvements so don't miss it.

Preconditions.

• The UBU1BPG1 Android 6.0.1 Marshmallow is only for Samsung Galaxy A7 A710M (2016). Don't try if your device's model different.
• Remember that your custom ROM will be deleted with all its cache files.
• Your existing custom recovery, whether it's TWRP or CWM or any other recoveries, will be replaced with a stock recovery.
• Your root access will be removed since your device's kernel will be restored.
• Your device's warranty will be restored.
• Make necessary backups before starting, if your device's rooted then make Nandroid backups.
• Enable Android USB debugging mode now if you haven't.
• Prepare your Windows computer now.
• A USB cable and USB drivers installed.
• It is better to disable your Samsung Kies or Antivirus installed on your PC just for temporarily to prevent them messing with Odin.

Note. Perform the instructions here but all the risks are yours to bear. Oke.

Download and then unzip these files to the computer of yours.

• Download Android 6.0.1 A710MUBU1BPG1.zip.
• Download ODIN v3.09.

How to update Galaxy A7 A710M (2016) to UBU1BPG1 Android 6.0.1 Marshmallow

1. Power off your device and then press and hold these keys; Volume Down + Home + Power to access Download Mode.
2. A warning message will then appear, then release all the pressed buttons, then press Volume Up to confirm entering the download mode.
   
   
3. When your device's in Download Mode, launch Odin from your computer.
   
   
4. Now connect your device to computer for Odin to detect your device.
5. Added!!! will show telling that your device's detected by Odin.
   
   
6. Now click AP (For Odin3 v3.09 or newer) or PDA (For Odin3 v3.07) button and then search the .tar.md5 based file. This is the UBU1BPG1 firmware file guys.
   
   
7. Now click Start button for starting the flashing procedures.
   
   
8. PASS notification on the Odin box as indication that UBU1BPG1 was successfully flashed to your device.
   
   
9. Now you can reboot your Samsung Galaxy A7 to complete the process.

Advertisements.

Fix bootloop and other errors.

Solution for that is simply performing the wipe data/factory data via recovery mode.

Great! Because you have successfully installed UBU1BPG1 (A710MUBU1BPG1) Android 6.0.1 Marshmallow firmware on Galaxy A7 A710M (2016) smartphone.

How To Accurately Throw Pokeballs On Pokemon Go With PokeAimer

How to accurately throw Pokeballs on Pokemon Go will be explained here. If you failed many times to catch Pokemon characters because the Pokeballs you throw didn't hit the target. Then you should read this post to help you throw PokeBall accurately.

Advertisements.

Catching the Pokemons is not as easy as finding them, because our skill on throwing Pokeball is decisive factor to catch the targeted Pokemon.

Did you know that you can now play Pokemon Go without moving but sitting?

But thankfully somebody from XDA comes up with a solution over the Pokeball throwing problem.

Catalyst06 is the developer name, releasing a rooted app namely PokeAimer. With this app installed on your rooted device, then you will increase the accuracy in throwing Pokeball.

Because PokeAimer enables the device's motion sensor for you to use. This is of course helping us to accurately throw Pokeballs to catch Pokemon monsters that appear on our GPS (Fix GPS signal not found easily on Pokemon Go).

So you should stop being worried over the misaligns when swiping the screen during your Pokemon hunts.

Requirements.

• You need to firstly root your Android device to use PokeAimer.
• To get PokeAimer, you need to join the app's official community page in Google+.
• The app is free app.

Note. PokeAimer is still in beta stage. But worry not because the developments is still going.

Advertisements.

How to install PokeAimer on Android to accurately throw Pokeballs.

1. Now join the PokeAimer community page on Google Plus to get the apk file.
2. Give the root access now.
3. Deactivate the AR Mode on Pokemon Go.

Well that's it. You are now the Pokeballs throwing master. Because you can always accurately throw Pokeballs to catch the Pokemon monsters.

How To Edit Build.Prop FIle Without Root

Guides to edit build.prop file without root via ADB in TWRP recovery will be discussed here to those who wish to make modifications to reach the deep level of their Android ecosystem.

Advertisements.

Usually people root their Android OS to edit build.prop, but actually root is not a decisive requirement to edit this file. Because without rooting your device you still be able to edit it.

As long as you have TWRP recovery installed on your device. Then you can edit build.prop file.

But firstly it's wise to know what build.prop file is.

Build.prop is simply an Android system file that provides information about system properties, settings and other essential data.

Some of the information are about device's manufactures and some information are specific about your Android device.

Values and strings inside build.prop are important to be used as permissions regarding what features can be enabled on your smartphones / tablets.

Editing build.prop means you are able to modify or even create properties that will be loaded when you reboot your device.

How to edit build.prop file without root using ADB inside TWRP?

As I mentioned on the first paragraph that we don't need to root our device first as long as you have TWRP recovery installed.

Because TWRP recovery provides root access of our Android and ability to setup a ADB to us in order to modify system partition's files. Therefore using TWRP we are able to edit build.prop without rooting.

Enable USB debugging mode on Android OS.

Therefore it's required for you to install TWRP first, the following are the instructions you can follow.

Install TWRP recovery via Odin or install TWRP recovery via fastboot mode.

Tips. Make sure you firstly make backup to your build.prop file before it's modified.

Advertisements.

Instructions to edit build.prop via TWRP recovery.

1. Install ADB and Fastboot on your computer now.
2. Now turn off your device and then boot into the TWRP recovery.
3. Now choose Mount -> then choose System from the partitions lists to mount your device's system partition and then go back.
   
   
4. You need to connect your device to computer now.
5. Launch a command window on your computer, then execute the command bellow to drag build.prop file.
   

   adb pull /system/build.prop

6. The command above is needed to downloaded the build prop file to your PC inside the same directory where you execute the command.
7. If there is no Notepad++ in your computer, then you need it, therefore download and install Notepad++ software to your computer.
8. Using Notepad++ to launch build.prop in your computer.
9. You can now modify your build.prop as you need and then save the result to your computer.
10. Now you need to transfer the modified build.prop file to your Android OS device with the following command.
    

    adb push build.prop /system/

11. You need to setup permission for build.prop file with the command below (one-by-one).
    

    adb shell
    cd system
    chmod 644 build.prop

12. After all the permissions set just reboot your device using the reboot -> system option via TWRP recovery mode.
13. Done.

Well you did all the required steps for editing build.prop file without root by simply utilizing the available of root access over your TWRP recovery. So enjoy modifying your OS Android. Hope this post useful for you guys.

with $260 an hour ,apple's ceo earns 43 times the median US household salary

In 2015, Mr. Timothy D. Cook made $2.28 million at Apple as a CEO. His compensation changed -75.3% from the previous year. Mr. Timothy D. Cook makes more than the average public executive  Mr. Timothy D. Cook's 2015 pay is broken down as follows: A $2,000,000 salary. This salary is significantly more than the average public executive's salary and significantly more than the salary of other executives at Apple. $281,327 in other compensation. This is more than the average public executive's other compensation and more than the other compensation of other executives at Apple.

Total Compensation vs AAPL Stock Return Over S&P 500 | FindTheCompany

With $2.28 million in 2015,It  makes for  or $260 an hour, $4 a minute, and $0.07 a second. This is 6 times the president's salary and 43 times the median US household income.

.

Install Pure Note7 Android 6.0.1 ROM On Galaxy S5 LTE G900F

Guides to install Pure Note7 custom ROM on Samsung Galaxy S5 LTE G900F phone to those who wish to experience the modified Android 6.0.1 Marshmallow on their Galaxy S5 LTE G900F.

The latest update of Pure Note7 ROM based on Android 6.0.1 is available now coming with new Samsung UI for Galaxy S5 LTE G900F. The ROM has everything the Marshmallow has with additional features added by the ROM developers.

Those who wish something more than the official ROM is offering can try this custom ROM if their device's already bootloader unloacked and powered with custom recoveries such as CWM / ClockWorkMod or TWRP.

Advertisements.

If you are interested to give Pure Note7 Android 6.0.1 ROM a try then you are invited to read and follow the full instructions written on this post now.

But of course you are also recommended to read the following preconditions first before starting.

Preconditions.

• Your Samsung Galaxy S5 LTE G900F should already be rooted.
• You have already unlocked your device's bootloader.
• You already have either CWM or TWRP recovery installed on your device.
• This ROM is made for Samsung Galaxy S5 LTE G900F, therefore don't try to other device and models.
• Make necessary backups such as Nandroid backup before starting.
• Enable USB debugging mode of your Samsung Galaxy S5 LTE G900F.
• Remember that your device warranty will be nullified for flashing a custom ROM like Pure Note7.

Follow the guides written here but all the risks are yours to bear, blame not anyone but yourself, for every possible risk which may happen during or after the flashing process.

Well now you are needed to grab the Pure Note7 custom ROM zip file and save it your computer.

• Pure Note7 Android 6.0.1 ROM ROM.zip.

Instructions on how to flash Pure Note7 Android 6.0.1 Marshmallow ROM on Samsung Galaxy S5 LTE G900F.

1. You must transfer the ROM zip file from your PC to phone using the USB cable connected to your phone and PC.
2. Once all the zip file transferred you need to disconnect from PC.
3. Now shut down your Samsung Galaxy S5 then boot into the CWM recovery by pressing and holding these keys; Volume UP + Home + Power.
4. Select the Wipe Data/Factory Reset.
   
   
5. You can now choose the Wipe Cache Partition. Continue to choose the Wipe Dalvik Cache.
   
   
   
   
   
6. You need to choose the Install Zip From SD Card -> Choose Zip From SD Card to find the ROM zip file then flash the zip file.
   
   
   
   
   
7. Once the zip file was installed successfully just select *****Go Back***** -> Reboot System Now.
   
   
8. Reboot will begin.
9. Finish now you can expect greatness from Pure Note7 custom ROM.

Advertisements.

Well done my friend you have successfully flashed the Pure Note7 Android 6.0.1 Marshmallow ROM on your Awesome my friend and I hope you like crDroid powered Android Marshmallow ROM.

which countries are swallowing up the wearables market

The below chart shows how the wearable devices market is expected to grow in the next 5 years. 2015 compared to 2020 between 2015 and 2020

WHICH NATONS ARE DEVOURING UP THE WEARABLES  MARKET 

Asian pacific market will outgrow all other geographies  with 194 million shipments of wearable devices, which includes,Smartwatches, Fitness bands, Apparel trackers and eyewear among others.North America and Western Europe are the next biggest market with shipments of 188 million and 127 million wearble devices  respectively, followed by   Central and Eastern Europe  with 45 million shipments and Latin American with  26 million shipments 

However the  Wearables segment the biggest demand is expected tocome from smartwatches and fitness bands  The biggest market pull  in Wearables will come from Asia pacific regions with China, Singapore and Hong Kong leading the growth for smartwatch and fitness bands adoption which will have the hihest penetration the highest wearble penetration . Smartwatches and smart eyewear and ear tracking devices are likely to see huge growth in Japan and South Korea

32% decline in smartwatches for the first time sends OEM's into panic

Smartwatches Shipments this year showsa blip in the wearable devices as it sales decrease by 16% .or the first time, the worldwide smartwatch market saw a year-over-year decline of 32%, according to preliminary data from the International Data Corporation (IDC) Worldwide Quarterly Wearable Device Tracker

However this will remain just a blip on the overall wearables radar as long term shipments of smartwatches are likely to soar to double digits. Also coupled with the fact is that wearble's are sitting on a huge cash pile.  ready to witness a massive adoption. Recent Businessinsider estimates smartwatch shipments will rise by a compound annual rate of 41% over the next five years. Smartwatches will account for 59% of total wearable device shipments this year, and that share will expand to just over 70% of  the $126million shipments by 2019.

Install Google Play Store On Xiaomi 8

Instructions to manually install Google Play Store on MIUI 8 beta is here for those who have updated to MIUI 8 and found out there is no Google Play Store and other services there can install Google Play Store manually on MIUI 8 powered phone.

Advertisements.

As we know that Xiaomi has recently rolled out MIUI 8 beta bringing a test for all provided features within, the reasons is of course to discover bugs and how well the MIUI 8 beta will perform on the user's device.

That means XIAOMI is expecting feedbacks from users and reporting the errors they experience when testing this newest XIAOMI version. Once everthing is settled, the final version will be launched and according report it won't be long.

And one bug found on XIAOMI 8 is there is no Google Play Store and Google services preinstalled, this is of course so inconvenience considering we rely to much on Google services for our daily activities.

But don't worry there is a workaround we can take Google Installer apk to manually install Google Play Store on XIAOMI 8 Beta. If you like to give the workaround a try. Then you are invited to continue reading the full instructions below.

English Mi Flash Unlock Tool To Unlock Xiaomi Bootloader.

How to manually install Google Play Store on XIAOMI 8 beta.

1. Now you need to enable USB debugging mode on Xiaomi device.
2. Once it's enabled, you need to download Google Installer apk file as well.
3. You can now launch file manager via your device and then install the Google Installer apk.
4. After the apk is fully installed, open it.
5. On the application main menu just tap on Start blue button for the app to start installing all the Google services to your device (The process can take sometimes so you need to wait).

Advertisements.

Remember that you can also read the following tutorials regarding MIUI.


How To Change Font On MIUI 7.1 And Use Custom Fonts.

Well done my friend now Google Play Store is running on your XIAOMI 8 beta based device.

Install Xposed On OxyGen OS OnePlus 3

You are here to learn how to easily install Xposed app on OnePlus 3 powered with Oxygen OS. Those who wish to flash Xposed on Oxygen OS are invited to find out the full instructions written on this post.

There is a way you need to firstly undergo in order to increase the ability of your new and shinning OnePlus 3, which is flashing Xposed framework. And fortunately Xposed installer is now available on Oxygen OS.

Advertisements.

With Xposed framework module installed, then you can then install all the awesome modules available on Xposed repository, flash custom ROMs, many more activities like remapping your device's hardware button. tweaking apps without messing with APK file.

So are you ready to take your device to the future level? If you are then please proceed.

Prerequisites.

• Root your OnePlus 3 device.
• Install TWRP recovery, follow the guides from below post.
  
  • Install TWRP recovery via Fastboot mode.
  • Install TWRP recovery via Odin.
• Backup your existing data if you think it's must.
• Charge your device's battery if you see its power too low.

Files you need.

• ARM 64 Xposed ZIP file.
• Xposed Installer APK.

Grab all the files above directly to your device or firstly save them to computer and transfer them to your device later on.

Remember to perform the instructions to flash Xposed modules on OxyGenOS at your own risk.

Advertisements.

How to install Xposed firmware on Oxygen OS OnePlus 3.

1. You need to grab the files above.
2. Now boot your OnePlus 3 into TWRP recovery mode.
3. Inside TWRP recovery menu, just find and install the Xposed zip file you downloaded earlier.
4. Now reboot your reboot your device once it's installed, 
5. Then head to file manager to install Xposed installer apk,

That's it!

Fix Wifi issues on OnePlus 3.

Any questions regarding the procedures installing Xposed framework on Oxygen OS on OnePlus 3 can be revealed on comment area.

Via OnePlus forum.

Fix OnePlus 3 Wifi Issues

Guides to fix OnePlus 3 Wifi problem that are caused by several technical factors. If you experience Wifi issues in OnePlus 3 you can read the suggested fixes from this post. Hopefully you will find one that works for your current OnePlus 3 Wifi issues.

OnePlus 3 is the new phone announced at June, 2016. The phone brings everything needed to make sure people who use it feeling satisfied and served. Because it comes with super killer specifications both in hardware and software.

Advertisements.

People who have bought OnePlus 3 phone will enjoy OS Android OS, v6.0.1 (Marshmallow), Qualcomm MSM8996 Snapdragon 820 chipset, Dual-core 2.15 GHz Kryo & dual-core 1.6 GHz Kryo cpu and Adreno 530 gpu.

With that platform inside, rest assured you will get smart, speed, solid performance and quality picture phone. However like many other smartphones, OnePlus 3 has its own problem too.

The recent and very disturbing issue found by users is Wifi signal issues. The causes of the problem could be various.

Just for you to know the culprits of the Wifi issue on your OnePlus 3 do not always come from software or hardware failure. It can sometime caused by Wifi signal router or with Wifi signal strength.

So on this post we will try to reveal all causes of your current Wifi issues.

How to fix OnePlus 3 Wifi signal issues.

OnePlus 3 Wifi issues caused by OS update.

Could be your Wifi issue came after you make OS update to newer version. Yes in many cases this is the culprit. Especially if the update is major update.

The fix.

Perform clean update or clean install. Make clean install, by wiping the entire phone and then install the firmware from scratch. Be sure you have backups before performing this. Visit the XDA developer thread to learn about it.

Advertisements.

OnePlus 3 Wifi issues caused by signal strength.

• Make check signal strength in your location if it's weak, then walk close to your Wifi router.
• Now check the configuration of your Wifi router, make it's properly configured. You can use other devices or laptop, if other devices can connect, the problem could be in your OnePlus 3.
• Probably it's because the authentication problem, be sure the password you enter is correct for the Wifi network you are trying to access.
• If you find obtaining IP address notification. That means you have IP configuration problem on OnePlus 3 or Wifi router.
• If your internet speed is too slow. This could be your signal is weak. Or if the signal is fine, then to fix it you can convert to Static IP on Wifi router.

I hope all the methods above can fix your OnePlus 3 Wifi issues, if somehow the problem still exists, perhaps you should perform resetting your device and then update to the official software from OnePlus.

Play Pokemon Go Without Moving But Just Sitting

Instructions to play Pokemon Go without moving but just sitting if you are lazy. Post contains the information to play Pokemon Go without walking, running and not moving.

What makes Pokemon Go game interesting and stands out from other games is the game's theme that requires us to be roamers by walking around the house, neighborhood or anywhere finding and catching the Pokemon characters.

Of course that hunting activity could be tiring us to the level we wish there is some workaround to allow us playing it without the need to move from our position.

Like myself, I like roaming the garden to find the monster, but when I am tired or so lazy I like to play it while I am siting on my cozy chair or bed.

Play Pokemon Go Without Moving But Just Sitting.

While the fact is, the workaround does exist, I mean it. We can play Pokemon while we sit or lay down on our bed. Let the cursor do the moving jobs, while you are in full relax on your chair.

Here is what we need an Xposed module that's designed to be your virtual side, and hunting the Pokemon.

Curious how the Pokemon Go Xposed module works? Watch the following video guys.

Interested to give it a try? I provide the full instructions to install the module to your device. However let me reveal a forewarn that this kind of trick could potentially effect your Pokemon Go getting banned by the server.

If you dare to face the risk, continue to the following instructions.

How to play Pokemon Go without moving but just sitting.

Grab the Pokemon Go Xposed Controls Module apk.

Requirements.

• Enable your Android USB debugging mode.
• Root your device.
• Good luck guys.

Instructions.

1. Install the apk file of the Pokemon Go Xposed module.
2. Now open Pokemon Go control app.
3. And play the game, press and hold the map to locate your position.
4. Now press the play button once your position's detected.
5. Open the Pokemon Go now. Use the on-screen controls to roam.

Enjoy the game while you are at your position. At least while drinking a cup of coffee. Nice.

Instructions To Install TWRP Recovery & SuperSu On T-Mobile Galaxy On5 (G550T/T1)

Instructions to install TWRP recovery on Samsung T-Mobile Galaxy On5 (G550T/T1) and root it by flashing SuperSU package file. So follow the guides here to flash SuperSU and TWRP on your T-Mobile Galaxy On5 now.

An under development TWRP recovery is now available for the Samsung Galaxy T-Mobile On5 (G550T/T1), so we can use it to root your device and flashing all the zip based files to our device afterward.

Advertisements.

Yes the TWRP is neither official nor in final stage, it's a result of development from XDA senior member, jcadduono. So you may stop expecting the best from it. However in overall it's working just fine. This one I got after reading reviews from some folks on XDA thread.

So this on this post I invite you to taste the custom recovery flavor once it is running on your T-Mobile Galaxy On5.

Features.

• MTP support.
• USB Mass Storage support.
• Micro SDcard and USB OTG storage support.
• f2fs file system support (read, write, format, backup & restore).
• exFAT file system support (read, write, format, backup & restore).
• NTFS file system support (read, write, format).
• ADB root.
• Full SELinux support.
• Built in android 6.0 tree.

Note. Installing a non-stock recovery file to your Android smart device will cause tripping your device's Knox warranty. Those make sure you find out whether your mobile provider will still protect your warranty on Knox. If you have fully aware about the risk, keep reading then.

Advertisements.

How to flash TWRP recovery and root T-Mobile Galaxy On5 (G550T/T1)

A file you need.
Grab the Samsung T-Mobile Galaxy On5 TWRP 3.0.2-0.

How to uninstall SuperSU that can't be uninstalled.

Instructions.

1. After you have downloaded the above TWRP file above, you need to visit the following post.
   

   How to install TWRP Recovery using Odin on Android devices.

2. Afterward to root your device, you can visit the following post.
   

   How to install SuperSU zip via TWRP recovery.

Well done guys because you just installed TWRP recovery and rooted your TWRP and Root T-Mobile Galaxy On5 (G550T/T1).

Guides To Install TWRP On Android Devices

Full instructions to install TWRP recovery on any Android powered device is here. The post contains the full guides to flash TWRP recovery on Android device with the help of Odin.

Having TWRP custom recovery app installed and running on our device is without doubt will benefit us -- users who wish to root and get their device to next level -- because on TWRP custom recovery we can perform things impossible to be performed on the stock recovery.

Advertisements.

We can root our device, we can flash custom firmware, we can perform full backups and other things great.

TWRP is the strong contender of CWM recovery and so far they are both the most used recoveries on the Android realm. Some people prefer one compared the other. But we can all admit that TWRP has a better interface and its touch screen utility makes it more interesting and tempting. But of course those are just additional features.

And on this post I will try to guide you to install TWRP recovery on Android by the help of Odin. Odin is the PC based utility and it's said developed by Samsung and later on leaked for public. And now the tool is used not just for upgrade or downgrading our firmware version, it's for non official activities too like rooting and for installing custom reocveries.

With Odin we can flash the TWRP recovery file to our Android phone. Of course we will need a Windows based computer in the process. As Odin is only supporting Windows operating system.

Preconditions.

• A Windows PC and a USB cable.
• Enable USB debugging mode.
• A unlocked bootloader device.
• Backup your current data.
• Make sure you follow the guides and don't skip any steps.

Remember that all the risks that could happen during or after the process are yours to bear.

Advertisements.

How to install TWRP recovery on Android devices.

Files you need.

• TWRP recovery file that supports your device. 
• You also need Odin3 (Grab the latest one guys).

Instructions to install TWRP recovery on Android device.

1. You need to turn your device off.
2. Now press and hold the following keys alltogether Volume Down + Home + Power to boot into the download mode. 
3. When you see the following warning appears on your screen, release all those keys and press Volume Up to access the Download Mode.
   
   
4. When your device's in Download Mode, just open Odin (The version I use now is v3-07 & click on it two times).
   
   
5. When Odin is opened, connect your Android powered device to computer using a USB cable.
6. Odin will try to identify your device, when you find Added!!!, that means your device's identified by Odin.
   
   
7. Click the PDA or PA, that depends on your Odin version. Now search the TWRP recovey file you previously downloaded to your computer. Once you find the file, just click on it.
   
   
8. Now click the Start button on Odin for beginning the flashing process.
   
   
9. Once the process is done, you will then see. Pass notification indicating that the process was successful.
   
   
10. finish.

How to boot into recovery mode on Android device?

After you have installed TWRP recovery mode, it's time to learn on how to enter to that mode. The steps to boot into recovery mode as follow.

1. Power off your device.
2. Now press and hold these keys at the same time; Power + Home + Volume Up. Keep pressing them until you see your device's logo screen, and release all the three buttons once the logo comes to appear on screen.
   
   
3. You are now inside the recovery mode /  TWRP recovery mode.

Any question if you have relating the procedures above? Don't be shy to reveal them on the comment area.

Fix Chainfire Systemless For Apps That Don't Identify Root Access

Instructions to fix systemless for all apps that fail to recognize root access. Reading this post will help you solve the problem of apps that don't identify root access caused by failure to work with Chainfire's systemless.

Advertisements.

Perhaps you just found out that there are number of apps that don't get along with how Chanfire's systemless root works on Android 6.0 Marshmallow, as the result those apps fail to acknowledge the root access on the rooted device where the apps are installed.

If that's the case all we need is an Android app that's developed to fix the Chainfire's systemless for apps that don't identify root access. The app's name is Terminal Emulator app and currently it's available on Google Play Store.

When the app is installed on the rooted Android powered device, then we can execute terminal commands on it to fix the problem.

So you need to firstly head to Google Play Store via your device or from computer then install Terminal Emulator app.

Advertisements.

Once it's installed on your device then type and execute the following commands to one and another into the emulator app.

su
mount -o remount,rw /system
touch /system/bin/su
mount -o remount,ro /system
reboot

If you are prompted to give root access just grant it.

Reboot then try the app that previously failed to identify the root access, you will see the app can recognize the root access.

funding clean technology start ups : 5 VC's that funds upto $10million

These are Among the biggest early stage investors in United States across medical and healthcare Categorry

Rockfort Capital :based out of Boston and invests across advanced hydrocarbons, renewable energy,sustainability and smart grid technologies.It generally funds  start ups from 5$milion to $25million : contact  them Hercules Capital :based out of  ElmHurst ,illinois provide seed, start up  as well as late stage funding. It has more than 20 start ups in its porfolio.Blurb, Tapjoy and Transmedics are among them.You can directly connect them here CIT Gap Fund : based out of Virginia mainly invests across seed and early stage.It invests across Biotech, healthcare and life sciences  Among its portfolio. Funding size : $0.1million to $5million. Connect with them Epic  Ventures :based out of Idaho, rexburg provides  seed and  early stage funding in the range of $1- $5milion.With a fund size of more than. $170million, its highest funding has been upto $5million. Connect with them Redpoint Ventures based out of Menlo park, California: It provides early stage investments from $1million to $5million.With a huge $2.5billion fund size, it invests across consumer products, media, internet,technology. Connect with them

Healthcare VC Firms | FindTheCompany

Remove Amazon Ads & Bloatware On Moto G4 Lock Screen

Instructions to remove Amazon ads & bloatware from Moto G4 lock screen. Reading this post will assist you removing ads and bloatware installed by Amazon from Moto G4.

In order to showing their ads, Amazon decided to be seller of the Moto G4 which is the latest iteration of the G series. We are offered with very tempting discount if buying the fourth generation of Moto G on Amazon, in total we only need to have $40 to bring the 5.5 inches smartphone.

Advertisements.

But of course as I mentioned above, Amazon needs compensations for their own benefits by placing ads on lock screen. This is the consequence that you -- as buyers -- must bear. But that's fine considering the very cheap price compared with the phone's price if you buy it somewhere else.

Not only ads, Amazon also added bloatware to make things more hilarious for users to finally think their device's hijacked and forced them using things they not need.

So some people get irritated with ads existence, a developer too, that's why an XDA recognized contributor namely Tomsgt, released an xml based file to help us removing the ads along with bloatware from our Moto G4.

If you feel sorrow with the ads and bloatware you can remove them once and for all, fortunately Amazon has made the process easy.

For those who haven't bought this phone, and read this post, then decide to get rid the intention to buy Moto G4 then don't be because you still can buy the phone from other place, but of course with higher prices.

However this offer only for US. therefore if you live outside the country, then you are not going to find this generous offer. So no worry.

Advertisements.

How to remove Amazon ads and bloatware on Moto G4 lock screen?

Preconditions.

• Only apply the tutorials written on this post if your device is Moto G4 -- and the method has been tested and proven work on X71625 and XT1644.
• Make sure that your computer has already Moto G drivers installed.
• Motorola program RSDlite 6.2.4 or just utilize the RSD-Flash Script for both Mac or Linux (Extract the file).
• Now grab this file remove-amazon-bloat.xml.
• Enable Android USB debugging mode on your Moto G4.

Instructions to remove Amazon ads and bloatware on Moto G4.

For non-rooted Moto G4.

1. You need to boot your Moto G4 to fastboot mode now, do so by using Volume Down + Power.
2. Now boot your Moto G4 into fastboot mode (Volume Down + Power).
3. Now launch the RSDlite 6.2.4 and then choose remove-amazon-bloat.xml.
4. You can press Start to begin the removing action.
5. Done now the ads and bloatware will be gone for good.

For non-rooted Moto G4.

1. If your Moto G4 is rooted, then what you need is simply flashing the image using the following command line.
   

   fastboot flash oem oem.img

2. Hit enter to begin the process.
3. Once done, you need to reboot your device.

You did it my friend, now there are no more either ads or bloatware from Amazon will messing your Moto G4, congratulations.

Fix GPS Signal Not Found Easily On Pokemon Go

In the Pokemon Go, GPS is playing a very crucial role without it then it's hard to find the Pokemon nears you. Therefore aside the camera, GPS is a must be working tool for users to be able finding and catching those virtual monsters.

However, the recent found issue found by users is the GPS signal is not found and their Android based phones tell them about it.

If that's so how come you are told about the location of the monsters. But don't worry to much. Because only a few steps needed then the problem can be solved. Let's check it out.

The cause of the problem because usually by default the GPS radios is deactivated, the reason for the deactivation is for saving the phone's battery from consuming so much by GPS.

How to fix GPS signals not found easily on Pokemon Go?

You will need to undergo the following several steps. But remember some phone may have different location of the GPS, but if you use Android Lollipop and newer, the overall of the options could be the same.

1. Open your device's home then go to Settings.
2. Now find and tap on Location.
   
3. You need to set the High Accuracy Mode and turn the Location on.
   
4. Or.
   
5. Now back to Settings -> About Phone..
6. Tap build number for 7 times in order to activate the Developer Options.
7. Once the developer options is activated, then it will appear on the Settings screen.
8. Then enter yourself to the developer options and then disable mock locations from there.

deciding the optimum url length for search engine benefits

Selecting the most appropriate url formats for search engines: 

How doe a search engine decide the "  length of  the optimum size of url which is considered to be search friendly ?

While its true that search engines does give a fair amount of importance for the url specification, SE also are quite adept to  understand  and  interpret regular long urls with numerous hypens   and the extent to which webmasters  can use them for " spamming it " ( for example some seo webmasters at the sound of getting too excited and may use words like buy-this-awesome-product-iasshumiort-html.as an actual url .) This only sends out the signal and tells the search robots and give them the sound of trumpets" telling them to discount the entire post/ url as a spam .. as its the result of an over excited adolescent seo webmaster

So how do you show the search engines about the content and its url parameters by ensuring you do this just the right way ?1) Describe your  content :  if a user can  make an accurate guess about your content  by looking at the address bar, you have done your job2) Use static URLs: dynamic url's are harder to index for both search and users
3) Descriptors not numbers:  never use  a random 1234 numbers or a set of numbers..when you can use brand/name etc4)use lowercase: Although urls can accept both upper and lower always desist from using Uppercase