Update Nexus 5 To Android 6.0 Chroma Marsmallow ROM

If you want something different running on your Nexus 5 then why don't you use Chroma Marshmallow custom ROM that's offering Android 6.0 software in hand and additional features within it. The features you will instantly enjoy once this modified ROM running on your 4.95" smarthpone is the ability to modify many areas on your device like customizing the notification styles, visuals and wallpapers by that will make your device is unique and different from others.

Advertisements.

And flashing a custom ROM is one of the benefits one will reap from rooting. Therefore if your device need to be improved and its performance needs to boosted up then try Chroma Marshmallow custom ROM. In this post you will be guided to flash it. Let's do it.

Preconditions.

• Remember that this instruction only for nexus 5, so don't follow the instruction, if your device is not the Nexus 5.
• Your Nexus 5 should already be rooted and have installed CWM recovery.
• And your Nexus 5 bootloader should already be unlocked.
• Backup everything you regard precious.
• Installing a custom ROM is not approved and supported by neither Google nor LG therefore all the risks are yours to bear.
• Enable USB debugging mode on your Nexus 5.
• You will likely loose your warranty for installing this ROM.
• Follow the entire instructions without skipping anything.
• Good luck guys.

Download this ROM zip file and Gapps too to your computer or laptop.

• Chroma Marsmallow Android 5.1.1 ROM.
• Gapps.

Instructions on how to install Chroma Marshmallow Android 6.0 ROM on LG Nexus 5.

1. When you've downloaded the ROM zip file, then transfer it to your Nexus 5 root folder, by connecting your smartphone to PC using a USB cable.
2. Now unplug your Nexus 5 from USB cable after the ROM zip file fully transferred.
3. And now you need to boot into Bootloader mode by firstly turning off your device, and then turning it on again by pressing these keys altogether; Volume UP + Down + Power.
4. Choose bootloader and then enter to the recovery mode (CWM), followed with selecting Wipe Data/Factory Reset.
   
   
5. You must now select the Wipe Cache Partition. Continue with selecting Wipe Dalvik Cache.
   
   
   
   
   
6. You must now select the Install Zip From SD Card -> Choose Zip From SD Card to get the Chroma Marsmallow zip file you previously transferred to your Nexus 5 SD card and then install the ROM zip file.
   
   
   
   
   
7. Once the installation processes have finished just select *****Go Back***** -> Reboot System Now.
   
   
8. Now you can reboot your Nexus 5.
9. Finish.

Well done my friend because you just flashed the Android 6.0 Chroma Marshmallow on Nexus 5 of yours now you can enjoy everything the ROM is offering to you. If you like this ROM. Then tell to all your family or friends who have a Nexus 5.

Instructions To Update HTC One M8 To Android 5.1.1 LolliPop (Candy5 ROM)

Halo guys here is a great news, because a third party Android developers have delivered to us a custom ROM namely Candy5 offering Android 5.1.1 (Lollipop) out of the box to the HTC One M8 smartphone, of course you can expect additional features that you will not find in the official Lollipop, they are the features from the developers not from the HTC.

Advertisements.

Are you interested to give the ROM a try. Then keep reading and read also the preconditions too.

Preconditions.

• You should know that the instructions written on this post are meant to HTC One M8 smartphone only, then do not try it if your device is other model, remember that to avoid bootloop or other technical issues.
• As usual it's wise to firstly backup your existing data before starting anything toward your smart device.
• HTC doesn't support or encourage you to flash modified software therefore your warranty will be nullified. And all the risks are yours to bear. Remember that guys.
• Your HTC One M8 bootloader should already be unlocked and have installed a CWM recovery.
• Your HTC One M8 is rooted already.
• Remember to follow the steps entirely and do not skip any steps.
• USB debugging mode of your smartphone should already be enabled.

Download the following ROM zip file to your computer or to your laptop.

• Candy5 Android 5.1.1 ROM.
• Google Apps zip file too.

Instructions on how to install Candy5Android 5.1.1 ROM on HTC One M8.

1. As usual you need to transfer the zip files of the ROM and Gapps to your device.
2. When all the files transferred then you can disconnect your HTC One M8 from USB cable.
3. And then turn off your smartphone to enter the Fastboot / Bootloader mode by turning it on while your fingers pressing the keys; Volume Down + Power.
4. When you are inside the recovery mode (CWM), you can select the Wipe Data/Factory Reset.
   
   
5. You must now select the Wipe Cache Partition. And you can continue selecting the Wipe Dalvik Cache.
   
   
   
   
   
6. Now select the Install Zip From SD Card -> Choose Zip From SD Card to search the Candy5 ROM zip file, when you have found it, then install it.
   
   
   
   
   
7. When the entire flashing processes have done you can select *****Go Back***** -> Reboot System Now.
   
   
8. Reboot now because your smartphone needs it.
9. Well done my friend all.

Well done my friend because you just managed to update your HTC One M8 to the Android 5.1.1 LolliPop software using Candy5 custom ROM. So you can enjoy all the decent features offered by it and see it yourself how good they are.

How To Update Sony Xperia Z To PureX Android 5.1.1 Lollipop ROM

Xperia Z users are invited to give a PureX custom ROM a try, however do not expect a Android Marshmallow but this unofficial software doesn't offer that newest Android version, instead you will enjoy the Android 5.1.1 Lollipop software along with the additional features added by the developers of the ROM guys.

Advertisements.

If you think that your Sony Xperia Z smartphone deserves to run a new software. Then I invite you to follow the instructions here.

Preconditions.

• I should remind you that only flash the PureX custom ROM on Sony Xperia Z, do not flash it on any other devices, except you are told by trusted sources.
• You also are recommended to firstly backup your current data.
• You need to also enable your device's USB debugging mode and have unlocked its bootloader.
• Remember that Sony itself doesn't recommend you to flash any software from outside their arsenal, therefore, your warranty will likely be voided.
• Your Sony Xperia Z should already be powered with a CWM recovery.
• A root access is required to follow the instructions from here.
• Follow the instructions here entirely and do not skip any steps.
• All the risks are yours to take.

Download the zip file to your own computer.

• PureX Android 5.1.1 ROM.

Instructions on how to update Sony Xperia Z to Android 5.1.1 PureX Lollipop ROM.

1. You must now transfer the PureX zip file from your computer to your Sony Xperia Z.
2. When done, just unplug your smartphone from USB cable, then go to step 3 below guys.
3. Now boot into the recovery mode (CWM) by powering off your phone then powering on while your fingers pressing these buttons; Volume UP + Home + Power.
4. Inside the CWM mode just select the Wipe Data/Factory Reset.
   
   
5. When you are within the Wipe Cache Partition. You can continue choosing Wipe Dalvik Cache.
   
   
   
   
   
6. Now you must select the Install Zip From SD Card -> Choose Zip From SD Card and then search and find the PureX ROM zip file and if found then install the ROM zip file guys.
   
   
   
   
   
7. When done you can *****Go Back***** -> Reboot System Now.
   
   
8. Now reboot your device guys.
9. You did it.

You should be happy now as your Sony Xperia Z is now powered with Android 5.1.1 Lollipop plus non-official great features brought by the PureX modified ROM. To verify it just head to Settings -> About phone -> view it whether PureX software that's running on your smartphone.

Update Galaxy S6 G920I To Noble Android 5.1.1 Lollipop ROM

Now Samsung Galaxy S6 G920I users can taste the modified Android 5.1.1 Lollipop software by taking the offers from the Noble custom ROM, and the ROM is truly offering many features and are great features to be enjoyed. The ROM is considered stable, smooth and fast.

Advertisements.

Ones that have installed the ROM have posted the positive reviews and of course it's not all of them perfect but in overall this ROM is kicking. Interested?. Then read the following preconditions.

Preconditions.

• Just for you to know that the instructions here are dedicated only for the Samsung Galaxy S6 G920I smartphone. Therefore, do not try it on any other ROM, understand?
• Do not forget to firstly backup your existing and precious data.
• Remember that flashing this ROM will effect of losing your device's warranty.
• Your device's bootloader should firstly be unlocked and a CWM recovery should already been installed.
• Root access is required to install the Noble custom ROM.
• Follow the instructions entirely and do not skip anything.
• Enable your Samsung Galaxy S6 USB debugging mode first.

Download the zip file to your PC or laptop.

• Noble Android 5.1.1 ROM.

Instructions on how to install Noble Android 5.1.1 ROM on Samsung Galaxy S6 G920I.

1. You need to connect your smartphone to PC in order to transfer the ROM zip file to your phone's root folder inside the SD card.
2. After the zip file transferred then disconnect your phone to PC.
3. Now you boot into the recovery mode by firstly turning off your device and then turn it on using these keys; Volume UP + Home + Power.
4. When you have entered the recovery mode (CWM), you need to choose the Wipe Data/Factory Reset.
   
   
5. And then select the Wipe Cache Partition. Continue your step with selecting Wipe Dalvik Cache.
   
   
   
   
   
6. You are now able to select the Install Zip From SD Card -> Choose Zip From SD Card to search the Noble ROM zip file and if you have found it then install the ROM zip file.
   
   
   
   
   
7. When finished just select *****Go Back***** -> Reboot System Now.
   
   
8. You can reboot your Samsung Galaxy S6 phone now.
9. Finish and done.

You did guys because you just finished updating your Samsung Galaxy S6 G920I phone to Android 5.1.1 Lollipop Noble ROM. Therefore you should be glad. And you can verify it by simply heading to Settings -> About phone -> and then see what's software powering your smartphone.

Update Samsung Galaxy S4 Mini I910 To Android 5.1.1 Unofficially With TeamUB ROM

TeamUB custom ROM is now available for the Samsung Galaxy S4 Mini I9190 phone, albeit it's not offering the Android 6.0 Marshmallow software, but it will certainly bring a feature-rich ROM to your Galaxy S4 that will increase your excitements and experiences using it.

Advertisements.

So in this post I invite you all to give the TeamUB ROM a try. If you are ready. Then I recommend you to firstly read the following preconditions.

Preconditions.

• Remember that the instructions on this post is meant only for the Samsung Galaxy S4 Mini I9190 and do not flash the TeamUB ROM on any other models rather than that smartphone.
• Make backups first before proceeding to the instructions.
• Samsung doesn't recommend to flash a custom ROM, therefore you will loose your warranty, and all the risks are yours to take for following the update tutorials considered unofficially here.
• Your device's bootloader should already been unlocked and your phone should already installed a CWM recovery.
• You will need a root access to flash this ROM.
• Do not skip any step follow them all.
• Your Samsung Galaxy S4 Mini USB debugging should firstly enabled.

Advertisements.

Download the zip file below to your computer.

• TeamUB Android 5.1.1 ROM.
• Google Apps zip.

Instructions on how to install TeamUB Android 5.1.1 ROM on Samsung Galaxy S4 Mini I9190.

1. When you have finished downloading all the zip files above then you need to connect your smartphone to computer in order to transfer the downloaded zip files to your phone's SD card root folder.
2. And now you can unplug the USB cable from your phone after the transfer done.
3. You can now power off your device and then boot it into the recovery mode by pressing and holding these keys; Volume UP + Home + Power.
4. When you are inside the recovery mode (CWM), you must select the Wipe Data/Factory Reset.
   
   
5. Continue with selecting the Wipe Cache Partition. Afterward you must select the Wipe Dalvik Cache.
   
   
   
   
   
6. This is the awaited moment, which is to install the file, you must select the Install Zip From SD Card -> Choose Zip From SD Card to search the TeamUB ROM zip file, when found just install the file, you can repeat this process to install the Gapps.
   
   
   
   
   
7. Once all the zip files flashed successfully just select the *****Go Back***** -> Reboot System Now.
   
   
8. You can now reboot your smartphone guys.
9. Finish now guys.

Awesome my friend because you just successfully installed the TeamUB Android 5.1.1 Lollipop ROM on Samsung Galaxy S4 Mini I9190 to Android 5.1.1 Lollipop and now you should be happy and enjoy it.

Update Galaxy Note 3 N9005 To Aurora Android 5.1.1 ROM

You can now update the Samsung Galaxy Note 3 N9005 of yours to Android 5.1.1 Lollipop using a custom ROM namely Aurora that's designed specifically to bring the official and non-official features to the said smart device.

Advertisements.

So those of you who wish to try something new and out of default, then Aurora ROM could serve your desire. And the post here will guide you through the entire installation procedures. Just follow them.

Preconditions.

• Keep in mind to only flash the custom ROM here on the Samsung Galaxy Note 3 N9005 phoneblet only and remember your bootloader should already be unlocked before starting the flashing procedures.
• As always I recommend you to firstly make backups.
• This is a custom ROM designed, developed and maintained by non-Samsung guys or not being supported, approved or recommended by Samsung.
• To install Aurora custom ROM your device's should already installed CWM recovery.
• Flashing this ROM will effect of losing your device's warranty.
• Root access is needed to flash this ROM.
• Follow the instructions entirely and do not skip anything.
• Do not forget to enable USB debugging mode of your phoneblet.

Advertisements.

Download the following ROM zip file to your PC.

• Download Aurora Android 5.1.1 ROM .

Instructions on how to install Aurora Android 5.1.1 ROM on Samsung Galaxy Note 3 N9005 tablet.

1. Once you downloaded the file, then connect your USB to computer then to your phoneblet, to transfer the ROM zip file to your phoneblet's SDCard root folder.
2. Disconnect your phoneblet to your USB cable once the ROM zip file has been transferred.
3. You can now shut down your phoneblet then boot into the recovery mode by pressing and holding these buttons; Volume UP + Home + Power.
4. Within the recovery mode (CWM), just choose the Wipe Data/Factory Reset.
   
   
5. Now choose the Wipe Cache Partition. And then choose Wipe Dalvik Cache.
   
   
   
   
   
6. You can now choose the Install Zip From SD Card -> Choose Zip From SD Card to further select the Aurora ROM zip file and once it's found then install the ROM zip file.
   
   
   
   
   
7. When the flashing process done then choose *****Go Back***** -> Reboot System Now.
   
   
8. The rebooting process will take place..
9. Done.

You did it guys because you just updated your Samsung Galaxy Note 3 N9005 to Android 5.1.1 Lollipop using the Aurora custom ROM.

Install G925FXXU3COI9 Android 5.1.1 On Galaxy 56 Edge G925F

Samsung Galaxy 56 Edge G925F can be updated to G925FXXU3COI9 Android 5.1.1 Lollipop, perhaps this update is disappointing for the device owners for them expecting that Samsung would release the Android 6.0 Marshmallow officially, but just for you to know that the reason behind of this release is because that Samsung KNOX is demanding for a better and secure operating system running that's why the stock release now to respond the demand.

Advertisements.

And if you wish to update then you can simply launch the Over The Air utility directly from your device or just plug your phone to computer for the Samsung KIES do its job. And if you have not being notified by neither OTA nor Samsung KIES. Then you are invited to follow the full instructions from this post

However be sure you firstly read the following preparations points written on this post.

Preparations.

• The G925FXXU3COI9 should be installed only on the Samsung Galaxy S6 Edge G925F phone.
• Remember if your device's rooted then this firmware will wipe out your root access.
• And so if your device is now using a custom recovery image then it will be replaced with a stock recovery.
• And if your device is powered with a custom ROM then this firmware will delete its cache partitions.
• Do not forget to make necessary backups before proceeding because if your device is stuck at bootloop then you will need to perform a factory reset.
• Do not forget to enable your Samsung Galaxy S5 Edge's USB debugging mode.
• Make sure your Windows OS PC, USB cable and USB drivers are ready to use.

Advertisements.

Download and extract the files below to your PC.

• Download G925FXXU3COI9 Android 5.1.1 Lollipop firmware.
• Download Odin3 v3-09 (You don't need to re-download Odin if you have done before).

Tutorials to install G925FXXU3COI9 Android 5.1.1 Lollipop stock on the Samsung Galaxy 56 Edge G925F

1. Remember power off your Galaxy S6 Edge then boot into the Download Mode, by pressing and holding these three keys; Volume Down + Home + Power do not release those keys.
2. When you see a following Warning on your device then tap the Volume Up to continue entering the mode (Or you can see the full instructions to enter download mode on Galaxy Note 3).
   
   
3. When your device's in Download Mode, then go to your computer, then open Odin by clicking it.
   
   
4. Get your USB cable now to connect the Samsung Galaxy 56 Edge G925F of yours to your PC.
5. Added!!! notification will then show up on your message box indicating that Odin has successfully recognized your phone.
   
   
6. Now click the AP (For Odin3 v3.09 or newer) or you can click PDA (For Odin3 v3.07) button to search the extracted firmware inside your PC. Usually the file is wrapped with with .tar.md5 extension.
   
   
7. Now you can click the Start button to for the firmware installation processes to begin.
   
   
8. PASS notification (See the picture below guys) will appear telling you that the installation process was successfully done.
   
   
9. You can now reboot your Android based smartphone now.

Fix bootloop and other errors.

Simply enter to Recovery Mode then perform a Factory Reset to fix bootloop.

Awesome guys you just updated your Samsung Galaxy 56 Edge G925F to G925FXXU3COI9 Android 5.1.1 Lollipop stock firmware. You can check it by simply going to About Phone then see what's firmware powering your device. Hope you find this post useful. See you again.

Install TWRP Then Root Huawei MediaPad X2 Tutorials

Hey guys if you want to get the most of your Huawei MediaPad X2 then you should follow the instructions on this post which is to install TWRP recovery and then root your MediaPad X2. The process is not too simple, yet it's worth applying. Why I say it's not simple because you need to firstly unlock your device's bootloader, download and install ADB, and then SuperSU.zip.

But of course once you've managed to install the TWRP custom recovery then root your device. You will reap a huge benefit. I believe you know it.

Anyway before we dig into the tutorials, I invite you to firstly read the preparations below, do it guys.

• Unlock your Huawei MediaPad X2 bootloader first.
• Make necessarry backups to all data you regard precious.
• A computer, a USB cable, and also original OEM Drivers installed.
• Enable Android USB debugging mode.
• You must get ADB & Fastboot packege with TWRP recovery.img file. Once it's downloaded extract it to get yourself to its content.
• Now download SuperSU.zip file then transfer it to your phone's internal storage.
• Make sure your device is MediaPad X2.

How to install TWRP recovery on Huawei MediaPad X2.

1. Now use your USB cable to connect your MediaPad X2 to PC.
2. Then launch the extracted Minimal ADB & Fastboot folder on your PC.
3. Then click the py_cmd.exe file to launch command window.
4. When command window opened, type this command.
   

   adb devices
   
   The above command will display all the connected adb device. See whether your device is there and connected.

5. Now type and execute this command.
   

   adb reboot-bootloader
   
   The above command will restart your device.

6. Now this command.
   

   fastboot flash recovery recovery.img
   
   The above command will install TWRP recovery on your device.

7. When the installation process done and TWRP was successfully installed, then choose recovery from Fastboot mode then you will find TWRP logo appears on screen, well you did it guys because you have installed TWRP.
8. Select reboot system via TWRP to reboot your device.

Change TWRP recovery language into English. 

 Of course you want an easy to understand language as your newly installed TWRP recovery, to do so, follow the steps below guys.

1. You must download TWRP recovery theme folder. It's a zip wrapped file.
2. Rename the folder to be ui.zip.
3. Then go to your phone's internal storage using a file manager.
4. Then make a new folder and then name it TWRP. Within the TWRP folder, create another folder and then name it theme.
5. Now transfer the ui.zip file to theme folder.
6. You can check it by simply boot your device into TWRP recovery then find out that English is your TWRP main language now.
7. Finish.

How To Root MediaPad X2. 

Now it's time for us to root Huawei MediaPad X2. Follow the steps below now. Okey?

1. Be sure you have transferred SuperSu.zip file to your phone's internal storage.
2. Now you must boot into recovery mode, by simply turning off your device then press and hold Power + Volume Down simultaneously.
3. Inside TWRP recovery just select Install -> find the SuperSu.zip file on your internal storage device -> tap on it -> then swipe to screen buttom to confirm flashing.
4. When SuperSu.zip was successfully installed, back to main menu then select reboot -> system.
5. Once your device finished rebooting, just check on app drawer, see that SuperSu is there.

Well done my friend you have successfully flashed TWRP recovery and also managed to root your Huawei MediaPad X2.