XXU1COH4 Android 5.1.1 Lollipop On Samsung Galaxy Note 4 SM-N910F

The Samsung Galaxy Note 4 SM-N910F owners must be happy now because their Android powered device is receiving an official update, under the build name N910FXXU1COH4 Android 5.1.1 Lollipop or XXU1COH4.

Advertisements.

If you haven't upgraded your firmware to the said version, then it's time to do so, you are provided with various methods to do so. You can install the firmware directly from your Galaxy Note 4 using System Update (OTA) or you can use Samsung KIES by connecting your phone to computer or you can install it manually. But whatever methods you are choosing the end of it will deliver to you the firmware and your device will be powered with it.

And in this post I elaborate the steps to install the firmware and we will use Odin tool to flash the firmware to your Galaxy Note 4 and of course the firmware file will also be provided for you to download and then unzip it to your computer.

And make sure you know that this firmware will give big changes to your device performance like deleting your root access and replacing your custom recovery image with stock recovery image.

Advertisements.

Are you ready?

Preconditions.

• The firmware must only be flashed on the Samsung Galaxy Note 4 SM-N910F phone.
• Your root access will be deleted and disappear for installing this firmware.
• Your custom recovery image will be gone too and be replaced with a stock recovery image.
• You must have a Windows PC and a USB cable.
• Enable USB debugging mode of Galaxy Note 4 SM-N910F.
• Backup all data and information stored in your device.
• Follow the instructions entirely.

Download and unzip these files to your beloved PC.

• Download M919UVUFOH3 Android 4.4.4 KitKat UVUFOH3 firmware.
• Download Odin3 v3-07 (If in your computer has Odin, then no need to download it again, just skip this).

How to flash N910FXXU1COH4 Android 5.1.1 Lollipop on the Samsung Galaxy Note 4 SM-N910F

1. Now enter the Download Mode, to do so you must turn off your device and then press these three buttons; Volume Down + Home + Power altogether.
2. When a warning appears, release those buttons, then you must press Volume Up key to access the download mode.
   
   
3. Now you can launch Odin tool from your computer.
   
   
4. Continue your step with connecting your phone to computer.
5. Added!!! appears on message box that means Odin has recognized your Android powered device.
   
   
6. Click the AP (For Odin3 v3.09 or newer) or tap the PDA (For Odin3 v3.07) button further search the .tar.md5 based firmware file on your PC.
   
   
7. Click Start button and leave other options untouched to begin the firmware flashing process.
   
   
8. PASS notification from Odin indicating that the firmware has been installed successfully.
   
   
9. Reboot your Samsung Galaxy Note 4 SM-N910F device now to complete the procedure.

Fix bootloop and other errors.

Just boot into the recovery mode and then choose the Wipe Data / Factory Reset.

Awesome guys because you have successfully installed the latest firmware for your device.

Install G850WVLU1BOD7 Android 5.0.2 On Galaxy Alpha SM-G850W

G850WVLU1BOD7 Android 5.0.2 Lollipop has been released for the Samsung Galaxy Alpha SM-G850W phone, you can grab it right now using the available automatic update features like Over The Air (OTA) or Samsung KIES, both will deliver the firmware easily without complications. However doing so will need a strong and solid Wi-Fi connection because you will download the entire firmware file size that's considered big.

Advertisements.

Or you can also manually install VLU1BOD7 Android 5.0.2 Lollipop on Samsung Galaxy Alpha SM-G850W phone, this method is usually used if we don't receive any notifications from neither OTA or Samsung KIES. The whole process are elaborated and written on this post for you to follow. So firstly read the following preconditions before begin.

Make sure you make necessary backups before doing anything.

Preconditions.

• The firmware should only be installed on the Samsung Galaxy Alpha SM-G850W phone.
• The root access your device might have will be erased by this firmware.
• The custom recovery image your phone might have will be replaced with a stock recovery.
• This process requires you to use a Windows PC and a USB cable.
• So be sure that you have enabled your Samsung Galaxy Alpha USB Debugging mode.
• Backup all data you regard so precious.
• Do not skip any steps..

Download and unzip these files to your beloved PC.

• Download G850WVLU1BOD7 Android 5.0.2 Lollipop firmware.
• Download Odin3 v3-07 (If in your computer has Odin, then no need to download it again, just skip this).

How to install G850WVLU1BOD7 Android 5.0.2 Lollipop on the Samsung Galaxy Alpha SM-G850W

1. Now enter to download mode, use the Volume Down + Home + Power keys after your device's fully turned off.
2. When a warning message appears on your phone's screen, just press Volume Up.
   
   
3. Launch Odin when your Samsung Galaxy Alpha is in Download Mode.
   
   
4. Now plug your phone to computer so Odin can detect it.
5. Added!!! notification can be seen on the message box indicating that Odin has successfully detected your phone.
   
   
6. Click the AP (For Odin3 v3.09 or newer) or tap the PDA (For Odin3 v3.07) button to find the firmware extension; .tar.md5 to be flashed on your phone.
   
   
7. Click Start button for Odin to start flashing the  G850WVLU1BOD7 firmware on your phone.
   
   
8. PASS notification (See the screenshot below) indicating that the firmware was flashed.
   
   
9. Restart your Samsung Galaxy Alpha SM-G850W device.

Fix bootloop and other errors.

To deal with the problem you can perform a factory reset.

Finish my friend.

P550XXU1AOH2 Android 5.0.2 (XXU1AOH2) On Samsung Galaxy Tab A 9.7 SM-P550

Samsung Galaxy Tab A 9.7 SM-P550 owners should now be happy because they are receiving an official firmware update that comes with more optimized Android 5.0.2 Lollipop, the update name is P550XXU1AOH2 (XXU1AOH2) and can be installed from either OTA or Samsung KIES, you are recommended to upgrade your existing firmware version to the version.

Advertisements.

And Install Android ROMs blog will try to walk you through the whole process manually and the entire steps are compiled neatly so you will follow them easily.

Preconditions.

• Do not flash this firmware if your device is not Samsung Galaxy Tab A 9.7 SM-P550 phone.
• Those who have their device rooted, I tell you that this firmware will wipe out your root access, do not forget that guys.
• If your phoneblet is powered with a custom recovery image will be replaced with a stock recovery image brought by this firmware.
• The flashing procedures require you to have a Windows PC and a USB cable.
• You are advised to also enable your Samsung Galaxy Tab A 9.7 SM-P550 USB Debugging mode.
• Do not start anything without firstly make backups.
• Have a great time guys.

Download and unzip these files to your beloved PC.

• Download P550XXU1AOH2 Android 5.0.2 Lollipop XXU1AOH2 firmware.
• Download Odin3 v3-07 (If in your computer has Odin, then no need to download it again, just skip this).

How to flash P550XXU1AOH2 Android 5.0.2 Lollipop XXU1AOH2 on the Samsung Galaxy Tab A 9.7 SM-P550

1. Now your phoneblet needs to enter the Download Mode, do so by firstly powering off your device and then press these buttons at once; Volume Down + Home + Power.
2. The activity will invoke a warning from your phone like on the picture below, thus release the three buttons you are pressing, continue with pressing the Volume Up to get your phone boot into the Download mode.
   
   
3. Launch Odin now.
   
   
4. Your phone need to be connected to computer now.
5. Added!!! will then come up on the message box.
   
   
6. Click the AP (For Odin3 v3.09 or newer) or tap the PDA (For Odin3 v3.07) button search the firmware file with .tar.md5 extension.
   
   
7. Click Start button begin the flashing procedures.
   
   
8. PASS notification will be showing, that means the firmware has been successfully flashed, congratulations.
   
   
9. Reboot the Samsung Galaxy Tab A 9.7 SM-P550 device now.

Fix bootloop and other errors.

Fixing bootloop can be done by simply performing a factory reset via recovery mode.

Finish now your device is powered with the latest and stablest firmware update from Samsung.

Install G928FXXU1AOH3 Android 5.1.1 Lollipop On Samsung Galaxy S6 Edge Plus SM-G928F

You are invited to update your Samsung Galaxy S6 Edge Plus SM-G928F to G928FXXU1AOH3 Android 5.1.1 Lollipop XXU1AOH3 firmware now after Samsung released the firmware recently, the firmware comes with great features and amazing improvements that will double your phone performance. So having this firmware installed is fully recommended.

Advertisements.

And Install Android ROMs blog will guide you through the entire installation process, you will end up having the Samsung Galaxy S6 Edge Plus powered with G928FXXU1AOH3 firmware.

Preconditions.

• Remember that you only install this firmware on Samsung Galaxy S6 Edge Plus SM-G928F not to any other models..
• In case your device's rooted, then it will be gone, as the phone's kernel be restored by this firmware.
• If you have installed a custom recovery image, then this firmware will replace it with a stock recovery image, make sure you know that.
• You need to have a working Windows PC and a USB cable.
• Do not forget that you need to enable your Samsung Galaxy S6 Edge Plus USB Debugging mode.
• Before doing anything, you must backup all the data you regard important.
• Backup your precious data.

Advertisements.

Download and unzip these files to your beloved PC.

• Download G928FXXU1AOH3 Android 5.1.1 Lollipop XXU1AOH3 firmware.
• Download Odin3 v3-07 (If in your computer has Odin, then no need to download it again, just skip this).

How to flash G928FXXU1AOH3 Android 5.1.1 Lollipop XXU1AOH3 on the Samsung Galaxy S6 Edge Plus SM-G928F

1. Your device should be entering the Download Mode, to do so firstly you need to turn it off, then press these three combination buttons; Volume Down + Home + Power altogether.
2. When your phone display a warning message like on the screen below, just release those buttons. then press Volume Up to get your phone to Download mode.
   
   
3. Now open Odin.
   
   
4. When Odin is launched, just connect your device to computer, using your USB cable.
5. Added!!! from Odin will tell you that your superb phone is detected.
   
   
6. Click the AP (For Odin3 v3.09 or newer) or tap the PDA (For Odin3 v3.07) button to find the firmware file you have unzipped previously, .tar.md5.
   
   
7. Click Start button to begin the full installation procedures.
   
   
8. PASS notification will appear telling you that the firmware was successfully flashed to your Samsung Galaxy S6 Edge Plus smartphone.
   
   
9. Now you need to restart your Samsung Galaxy S6 Edge Plus SM-G928F.

Fix bootloop and other errors.

To fix bootloop, all you need to do is entering the Recovery Mode, then choose  Factory Reset, done.

Done.

Install M919UVUFOH3 Android 4.4.4 KitKat (UVUFOH3) On T-Mobile Samsung Galaxy S4 SGH-M919

T-Mobile Samsung Galaxy S4 SGH-M919 can be upgraded to the M919UVUFOH3 Android 4.4.4 KitKat (UVUFOH3) firmware, it's the latest update for the device comes with great features, and fixes for the reported bugs, you should not let this update skipped instead you are recommended to immediately install the update on your superb phone.

Advertisements.

Preconditions.

• Remember this firmware update is only for the T-Mobile Samsung Galaxy S4 SGH-M919 phone.
• If your phone is rooted, then this firmware will wipe out its root access, remember that guys.
• If your smartphone is using a custom recovery image then it will be substituted with a stock recovery.
• Have a Windows PC and a USB cable.
• Enable your Samsung Galaxy S4 USB Debugging mode.
• Backup your existing data guys.

Advertisements.

Download and unzip these files to your beloved PC.

• Download M919UVUFOH3 Android 4.4.4 KitKat UVUFOH3 firmware.
• Download Odin3 v3-07 (If in your computer has Odin, then no need to download it again, just skip this).

How to flash M919UVUFOH3 Android 4.4.4 KitKat UVUFOH3 on the T-Mobile Samsung Galaxy S4 SGH-M919

1. You need to boot into the Download Mode, firstly turn it off your smartphone then press these three buttons; Volume Down + Home + Power at the same time.
2. If you see this warning, then release the buttons, and press Volume Up to enter to Download mode.
   
   
3. You need to open Odin now.
   
   
4. Then connect your phone to computer using a USB cable.
5. Added!!! from Odin indicating that your smartphone is detected.
   
   
6. Click the AP (For Odin3 v3.09 or newer) or tap the PDA (For Odin3 v3.07) button to get the firmware you have unzipped to your computer, the extension of the firmware is usually .tar.md5.
   
   
7. Click Start button to start the flashing process.
   
   
8. PASS notification shows up telling you that the firmware was successfully installed to your Samsung Galaxy S4 smartphone.
   
   
9. Reboot your T-Mobile Samsung Galaxy S4 SGH-M919 device.

Fix bootloop and other errors.

To fix bootloop just perform a factory reset via Recovery Mode (Enter recovery by firstly turning off your device then press Volume Up + Home + Power buttons).

Done.

Root Samsung Galaxy J7 For All Firmware

Hey guys here I would like to discuss a very useful tutorials which is how to root Samsung Galaxy J7, if you are the owner of that mid range Android powered device released this year, then you may want to read this post and follow the full instructions on how to bring root access to it.

Advertisements.

They are very easy steps to complete. We will be using the help of the TWRP recovery. Have you installed that handy recovery?

Follow the full instructions to install TWRP recovery on Samsung Galaxy J7 phone.

Rooting your Samsung Galaxy J7 will give you a list of benefits such as flashing a custom Kernels, installing a custom ROMs, get rid off useless bloatware, overclocking or undervolting your CPU frequencies, and many other non operational activities that will only be a mid-day dream on non-rooted Android device.

However rooting Android OS based device are not recommended and approved by several manufactures, Samsung is one of them. The Korean company will refuse to contribute you with a free service for any technical assistance you need in the future, because your warranty is voided so there is no free ride. You need to pay.

Advertisements.

And there is a potential chance you may end up bricking or damaging your device during or after performing rooting, in that case the responsible is yours to bear, a blog like mine and many others on the internet only sharing the instructions to get the most of your device using the most trusted apps or tweaks that need to be installed, be sure you know it.

Preconditions.

• Make backup for all your the data you regard important.
• You need to download the root exploit from a third-party to your computer, to be further transferred to your phone, thus be sure to firstly and temporarily disable your antivirus on your computer.
• Prepare your computer and a USB cable.
• Enable USB debugging mode first.
• Perform the instructions at your own risk.

How to root Samsung Galaxy J7 for all firmware

Download to your computer but do not unzip the files.

• Download UPDATE-SuperSU-v2.46.zip.

Instructions.

1. Once you have downloaded the SuperSU exploit to your computer, then connect your phone to computer.
2. When your phone's connected to computer using a USB cable, then transfer the SuperSU zip file to your phone.
3. Disconnect your phone to USB cable.
4. Now power off your phone then enter to Recovery Mode.
5. On the TWRP recovery interface, just choose Install, then get the SuperSU zip file to start the flashing.
   
6. Once done, back to main TWRP recovery interface then choose Reboot.
   
7. If you are stuck at bootloop, then re-enter to TWRP to further choosing “wipe data factory reset” and “wipe cache partition.

You can also read how to update Samsung Galaxy E7 with a stock and custom ROM.

Well done my friend your Samsung Galaxy E7 is already rooted that means you can perform great things to improve its performance and stability and see you again in the next posts of the Install Android ROMs blog.

How To Install TWRP Recovery On Samsung Galaxy J7

If you are not too happy with what a stock recovery image is offering, then there is no reason to be frustrated, you still can install a custom recovery to your Samsung Galaxy J7. Here we will be elaborating a complete step by step to install one of the famous custom recoveries available namely TWRP. The recovery has been updated to the latest version and supporting many and various Android powered devices from different manufactures.

Advertisements.

Once your Samsung Galaxy J7 is powered with TWRP recovery then you can do things like rooting your device, deleting bloatware, installing zip based files, flashing custom kernels, upgrading to the available custom ROMs, overclocking your device, and last but not least you can also making Nandroid backups that will create a mirror for your entire content.

However those kind of activities are not approved by Samsung itself, some of them could even nullify your device's warranty, thus make sure you know that once your device is rooted (For example) then your warranty will also be gone as well. And TWRP recovery is not Samsung produced software, it's the result of the creativity from third-party Android developers that want more rather than a stock recovery is offering.

Believe me having a custom recovery image installed is fun. It can also be replaced with a stock recovery brought by the official firmware released by Samsung in the regular update circles. If that's the case you need to start from the beginning, re-install the custom recovery and then root your beloved device.

Advertisements.

Since this is not Samsung made software, therefore things like bricking or such may happen, you know thus if that's really happening then you are the one should be held responsible and do not blame anyone except yourself. If you are interested then you are invited and welcomed to read the full instructions to install TWRP recovery on Samsung Galaxy J7 of yours.

Preconditions.

• Make a necessary backup to your existing data.

How to install TWRP recovery on Samsung Galaxy J7

Download and unzip these files to your beloved PC.

• Download twrp-2.8.7.0.
• Download Odin3 v3-07 (No need to redownload Odin).

Instructions.

1. Power off your Samsung Galaxy J7 to boot into the Download Mode, then press these three buttons; Volume Down + Home + Power.
2. When a Warning appear, just release those three buttons, then press Volume Up , you are in the Download mode now.
   
   
3. Open Odin from your PC.
   
   
4. Plug your device to USB cable then to your PC.
5. Added!!! on the message box on Odin indicating that your phone is detected.
   
   
6. Click the AP (For Odin3 v3.09 or newer) or tap the PDA (For Odin3 v3.07) button to get the recovery file on your PC.
   
   
7. Click the Start button for Odin to flash the recovery file to your Samsung Galaxy J7.
   
   
8. PASS notification will appear showing you that TWRP recovery has been successfully flashed to your Android based smartphone.
   
   
9. Reboot your Samsung Galaxy J7 now guys.

Finish and you just successfully followed on how to install TWRP recovery on Samsung Galaxy J7 smartphone and congratulations.

How To Update Samsung Galaxy J7 With Stock Or Custom ROM

Here we will be discussing about how to update Samsung Galaxy J7, the reason we take stock update delivered by Samsung is of course to keep our Android powered smartphone at best performance, because each firmware update comes with bug-fixes, performance improvements, and stability. Thus it's not surprising if all the smart device owners are recommended to immediately install whatever updates rolled out by their device manufacturers.

Advertisements.

In Samsung world, we are handed with three updating methods to choose. System update or also known OTA update is the most easy and almost less effort method to install latest firmware versions, the second one is using Samsung KIES that we have installed to our computer and the last yet a bit complicate is performing update manually through flashing the firmware with the help of Odin.

And in this post we will explain on how to update Samsung Galaxy J7 manually using Odin, a computer, a USB cable, USB debugging mode and of course the firmware files we need to firstly download and unzip to your computer. So if this method is not familiar for you then you are invited to study the entire steps.

Preconditions.

• If your phone is rooted, then updating to the official firmware will make your kernel restored, as the result your root access will disappear.
• If your device is using a custom recovery image, then it will be taken down then be replaced with a stock recovery image brought by the firmware.
• Make a necessary backups before performing any update, who knows you might end up facing a bootloop that forced you to apply a factory reset.
• Prepare your working Windows OS computer and a USB cable.
• Enable your device's USB debugging mode.

Advertisements.

How to update Samsung Galaxy J7

Download and unzip these files to your beloved PC.

• Download the firmware for your phone.
• Download Odin3 v3-07 (No need to download if you already have it).

Instructions.

1. Now you need to boot your Samsung Galaxy J7 to download mode, turn it off then press and hold these three keys altogether; Volume Down + Home + Power.
2. If you see a warning like in the picture, just press Volume Up to enter to that mode.
   
   
3. You can launch Odin now.
   
   
4. And then connect your phone to computer.
5. Added!!! will appear on message box, that means Odin has detected your device successfully.
   
   
6. Click the AP (For Odin3 v3.09 or newer) or tap the PDA (For Odin3 v3.07) button to search the firmware file you previously unzipped, usually the extension of the file is .tar.md5.
   
   
7. Click the Start button to begin the installations process.
   
   
8. PASS will come out telling you that the firmware has been flashed to your phone.
   
   
9. You need to restart your Samsung Galaxy J7 now to fully finish the flashing procedure.

Fix bootloop and other errors.

Those who are stuck at bootloop after rebooting, then can perform a factory reset, by firstly boot into a Recovery Mode, then select the Wipe Data / Factory Reset. Make sure you have already have backups.

Done! Your Samsung Galaxy J7 has been updated to the official firmware. But of course you already know that there is a list of magnificent custom ROMs that are offering more than stock ROMs are offering. Thus knowing the how to install these non-stock software will benefit you too in the future.

And for giving a complete information, I decide to also include the full instructions to install a custom ROM to Samsung Galaxy J7 phone, are you ready? Well, let's do it, guys.

Remember that you are recommended to always make necessary backups over your precious data before performing this kind of activity. And all the risks which may happen during or after performing the procedures are yours to bear, blame not anyone but yourself if that really happens to your phone or tablet.

How to install a custom ROM on Samsung Galaxy J7

Preconditions.

• Your device should already be rooted, if it's not, then root Samsung Galaxy J7 of yours.
• Have installed a custom recovery image to Galaxy J7 phone (How to install TWRP recovery on Samsung Galaxy E7).
• Backup your data.

Instructions.

1. Download the custom ROM file and Google Apps and then connect your phone to computer to transfer all the zip files to your phone internal storage.
2. After all the zip files transferred successfully, then disconnect your phone from USB cable.
3. Now power off your Samsung Galaxy J7 to boot into a Recovery Mode by pressing and holding these three buttons; Volume UP + Home + Power.
4. Wihin CWM recovery mode, just choose Wipe Data/Factory Reset.
   
   
5. And then select Wipe Cache Partition. Afterward, you need to also select Wipe Dalvik Cache in Advanced Menu.
   
   
   
   
   
6. Now it's time to install the custom ROM zip file, just choose Install Zip From SD Card -> Choose Zip From SD Card to get the custom ROM zip file you have transferred before to internal storage of your Android powered phone.
   
   
   
   
   
7. Repeat the process to install Google apps zip file.
8. After all the zip files installed, just *****Go Back***** -> Reboot System Now.
   
   
9. Done you just updated your Samsung Galaxy J7 to a custom ROM.

Hope you will find this post useful.