Install G920FXXU2BOFJ (XXU2BOFJ) On International Samsung Galaxy S6 G920F

International Samsung Galaxy S6 G920F receives an official update, G920FXXU2BOFJ (XXU2BOFJ) bringing more optimized Android 5.1.1 Lollipop. You can immediately install the release automatically through either Samsung KIES installed on your PC or through System Update on your smartphone's About section. The choice is yours to take.

Advertisements.

However if somehow you are not being notified through those automatic utilities or it's because your Samsung Galaxy S6 is rooted and powered with a custom ROM then you can opt the third options, which is using the manual installations that will deliver the same software to your smartphone.

There is no reason to halt yourself from getting this firmware as it's armed with so many tremendous features, improvements and bug-fixes to keep your Samsung Galaxy S6 at best performance possible. So prepare everything required before getting yourself to the manual guides and do not restrain yourself to firstly read the following preconditions section.

Preconditions.

• If your smartphone is not then International Samsung Galaxy S6 G920F then don't bother installing the G920FXXU2BOFJ (XXU2BOFJ) official build.
• Those with a rooted Samsung Galaxy S6 will loose their root access.
• In case your smartphone has a custom recovery app, then it will be replaced with a stock recovery image brought by this firmware. And if your phone is using a custom ROM then this firmware will erase its system partitions.
• Not yet! You must activate USB debugging mode of your smartphone first.
• Since we will use Odin to flash the firmware, then we will need a Windows OS based PC and a USB cable also USB drivers installed.
• Do not forget to firstly disable Samsung KIES and antivirus program installed on your PC to avoid them interrupting Odin from running and re-enable them after the firmware is successfully flashed to your smartphone.
• Your battery power should be enough, charge your phone if it's less than 50 percent, do it guys.
• Make backups first, especially those who use a custom ROM, as you will need to perform a factory reset as the final step.
• KIES will continue detecting your phone.
• Do not skip any step.

You have fully understood of what you need to do and things that will come as results therefore let's get started to install G920FXXU2BOFJ (XXU2BOFJ) Android 5.1.1 Lollipop firmware on your International Samsung Galaxy S6 G920F smart device.

Well you can continue to the full guides but remember that all the risks are yours to bear.

The following files are needed to be downloaded to your computer.

• Download G920FXXU2BOFJ Android 5.1.1 Lollipop firmware.
• Download Odin3 v3-07 (If you have Odin -- whatever versions -- there is no need to download it again).

Now you must unzip all the downloaded zip files above to be further installed by Odin to the computer.

Advertisements.

How to install G920FXXU2BOFJ Android 5.1.1 Lollipop on International Samsung Galaxy S6 G920F

1. Completely shut down the Samsung Galaxy S6 smartphone of yours to be further boot into the Download Mode. When it's shut down just press these three buttons; Volume Down + Home + Power.
2. Release the buttons when your phone display a warning like these, and press Volume Up to access the Download Mode.
   
   
3. Launch Odin now from your PC.
   
   
4. Connect your Samsung Galaxy S6 to your computer with USB cable as their bridge.
5. Odin will show Added!!! in message box indicating it has detected your smartphone.
   
   
6. Now simply click on the AP (For Odin3 v3.09) or click the PDA (For Odin3 v3.07) button to search the firmware file (With .tar.md5 extension) on your computer.
   
   
7. Now you can start the installation by simply clicking Start button.
   
   
8. PASS notification will show up. That means that the G920FXXU2BOFJ (XXU2BOFJ) Android 5.1.1 Lollipop firmware was flashed successfully.
   
   
9. Restart your device now guys.

Fix bootloop and other errors.

Those who their smartphones are unable to boot in normal can perform a factory reset via Recovery Mode.

Done.

Install G925FXXU2BOFL / G925FXXU2BOFJ On International Galaxy S6 Edge G925F

Samsung has released G925FXXU2BOFL (XXU2BOFL) and G925FXXU2BOFJ (XXU2BOFJ) Android 5.1.1 Lollipop firmware for the International Galaxy S6 Edge G925F phone. You can install the said firmware on your Galaxy S6 Edge using the manual instructions on this post right now guys.

Advertisements.

The official G925FXXU2BOFL (KSA) and G925FXXU2BOFJ (XEU) bringing Android 5.1.1 Lollipop with number of improvements, changes and security fixes are available for the Samsung Galaxy S6 Edge, you are welcome to upgrade your existing firmware version using the available updating options like OTA, Samsung KIES or using manual instructions in case you dislike to wait for its coming to automatic updates like KIES or OTA. Or perhaps your device is powered with a custom ROM and being rooted to which you will not receive any update notifications automatically.

In this post I will try to guide you through the entire process of bringing XXU2BOFL and XXU2BOFJ build firmware.

Preconditions.

• Remember that you only install the G925FXXU2BOFL (KSA) or G925FXXU2BOFJ (XEU) Android 5.1.1 Lollipop firmware to International Galaxy S6 Edge G925F. Not on any other Samsung Galaxy S6 models.
• Any root access that you might have now will be wiped out by the firmware.
• Those who use a custom recovery like CWM / TWRP / Philz / etc will be replaced with a stock recovery and also if your phone is using a custom ROM will need to perform a factory reset to boot normally and the ROM system partition will be deleted.
• You will need to firstly activate USB debugging mode of your Samsung Galaxy S6 Edge .
• Odin will be used on this tutorials therefore make sure you have a working Windows OS computer, a USB cable and also have installed USB drivers originally from Samsung,
• Disable both antivirus and Samsung KIES installed on your computer temporarily to avoid them interrupting Odin from working.
• The battery of your smartphone should be enough to perform the flashing procedures below.
• Do not start the procedures before making necessary backups over your existing data.
• KIES will recognize your smartphone once the firmware is fully installed.

Awesome. Now you can continue to the main topic which is to install G925FXXU2BOFL (XXU2BOFL) and G925FXXU2BOFJ (XXU2BOFJ) Android 5.1.1 Lollipop official build firmware on your International Samsung Galaxy S6 Edge G925F smartphone.

Do it at your own risk.

Now you must download the files below to your own PC.

• Download G925FXXU2BOFL (KSA) Android 5.1.1 Lollipop firmware.
• Download G925FXXU2BOFJ (XEU) Android 5.1.1 Lollipop firmware.
• Download Odin3 v3-07 (No need to download it if you already have Odin on your computer).

Do not forget to unzip / extract the above firmware and Odin files after they are downloaded to your computer or PC guys.

Advertisements.

How to install G925FXXU2BOFL (XXU2BOFL) and G925FXXU2BOFJ (XXU2BOFJ) Android 5.1.1 Lollipop on International Samsung Galaxy S6 Edge G925F

1. Power off your Samsung Galaxy S6 Edge phone now then boot into the Download Mode. When your phone is powered off, press the following buttons; Volume Down + Home + Power.
2. A warning will show up to your phone's screen, release the three buttons, continue with pressing the the Volume Up to continue accessing to the download mode.
   
   
3. You need to open Odin now from your computer.
   
   
4. Connect your smartphone to PC using your USB cable.
5. When your smartphone is detected by Odin you will then see a notification saying Added!!!.
   
   
6. If that's so, you must click the AP (For Odin3 v3.09) or click the PDA (For Odin3 v3.07) button to further get the firmware file you unzipped earlier to the computer of yours.
   
   
7. Click Start button on Odin to begin the installations.
   
   
8. When the installation processes done, Odin will show you a notification saying PASS. In that case, you should be happy because the G925FXXU2BOFL (XXU2BOFL) and G925FXXU2BOFJ (XXU2BOFJ) Android 5.1.1 Lollipop firmware was successfully flashed.
   
   
9. You need to restart your Samsung Galaxy S6 Edge now.

Fix bootloop and other errors.

Sometimes your smartphone doesn't boot to normal mode, instead it's stuck at Samsung animation logo, if that's the case just turn your phone off then boot into recovery mode to further perform a factory reset (Wipe Data / Factory Reset) action to fix the problem.

Well done guys.

Instructions To Install T335XXU1BOF8 Android 5.1.1 On Samsung Galaxy Tab 4 8.0 LTE SM-T335

T335XXU1BOF8 Android 5.1.1 Lollipop XXU1BOF8 firmware has been released for the Samsung Galaxy Tab 4 8.0 LTE SM-T335 owners. You can install the firmware manually using the full instructions on this post.

Advertisements.

Samsung is once again releasing an official firmware this week, the build number of the software is T335XXU1BOF8 Android 5.1.1 Lollipop XXU1BOF8 and designed for Samsung Galaxy Tab 4 8.0 LTE SM-T335 smartphone. You can start to upgrade your existing smartphone automatically using either Over The Air (OTA / System Update) on your phone or simply connect your phone to computer with KIES installed to get the same build firmware. The point of having our device's firmware up-to-date is to make sure it runs accordingly and as it's expected.

However for those who are not being notified through neither OTA nor KIES, because their phone is rooted or using a custom ROM, then can go for a manual installation. The manual procedures are pretty simple, we will provide the firmware file itself and Odin tool to install XXU1BOF8 Android 5.1.1 Lollipop firmware on Samsung Galaxy Tab 4 8.0 LTE SM-T335 phone.

If you want to lift your phone firmware version to the T335XXU1BOF8 then you are pleased to follow each step from the manual instructions below. And remember that the process require you make backups your existing data to avoid losing it when performing a factory reset. Factory resetting your phone is necessary if you experience bootloop after the process.

Preconditions.

• You only install the T335XXU1BOF8 Android 5.1.1 Lollipop firmware only if your smartphone is Samsung Galaxy Tab 4 8.0 LTE SM-T335.
• Remember that this firmware fill restore your phone's Kernel in that case your root access will be deleted.
• Those whose their phone is powered with a custom ROM will notice that the ROM system partitions will be wiped out.
• Your device USB debugging mode should firstly be enabled.
• Prepare your Windows OS computer and USB cable (also has USB drivers installed) because we will use Odin tool.
• Do not forget to firstly deactivate the antivirus program and KIES on your computer beforehand to make sure they will not interrupt Odin from working.
• Your device's battery power should be enough to perform the manual installations.
• Again, backup your existing data, do it guys.
• Your phone will be recognized by Samsung KIES once this firmware is fully installed and running on your smartphone.

Good since you have read all the points above, then it is time to update your Samsung Galaxy Tab 4 8.0 LTE SM-T335 to T335XXU1BOF8 (XXU1BOF8) Android 5.1.1 Lollipop official build firmware.

Remember that all the risks which may happen during or after the process are yours to take..

You need these files, download them all, to your computer.

• Download T335XXU1BOF8 / XXU1BOF8 Android 5.1.1 Lollipop firmware.
• Download Odin3 v3-07 (Do not need to download it if you already have it on your PC).

You need to unzip the files above once they are downloaded to your computer.

How to install T335XXU1BOF8 Android 5.1.1 Lollipop XXU1BOF8 on Samsung SM-T335 Galaxy Tab 4 8.0 LTE-A

1. Turn off your Galaxy Tab 4 now and then boot it to Download Mode. When it's turned off, press these three buttons together; Volume Down + Home + Power.
2. When you see a warning, release the buttons and then press Volume Up to continue entering to the mode.
   
   
3. Now launch Odin you downloaded on your PC.
   
   
4. Then plug your Samsung Galaxy device to USB cable and then plug it on your computer USB port.
5. Odin will then try to detect your phone, if it manages to detect your device, the tool will show you a notification saying Added!!!.
   
   
6. Now click the AP (For Odin3 v3.09) or click the PDA (For Odin3 v3.07) button and then find the firmware file you previously unzipped to your PC earlier.
   
   
7. Now click the Start button on Odin for the tool to begin flashing the firmware to your smartphone.
   
   
8. When done, you will see PASS notification. That means Odin has successfully installed the telling you that it has fully flashed the T335XXU1BOF8 Android 5.1.1 Lollipop XXU1BOF8 released on Samsung Galaxy Tab 4 8.0 LTE SM-T335 device.
   
   
9. If that's so, you need to reboot your device now, and wait the process.

Fix bootloop and other errors.

Some users reported they are stuck at animation logo or bootloop, thus unable to boot normally, if that what you are experiencing now just enter to the recovery mode (Turn off your phone, then press Volume Up + Home + Power) and then choose Wipe Data / Factory Reset option from recovery mode interface. It will perform a factory reset procedure. Just wait guys. Done.

That's it guys.

Master Bastard Limerick Challenge

If anyone remembers near the end of April, the Bastards from the Master Bastard Podcast issued us a Limericks challenge that we gladly accepted (see post Challenge Accepted!). Well, due to delays from us, we were finally able to record and deliver them to the Bastards last week. Read more »

Install crDroid (Tianchi) Android 5.1.1 On Sony Xperia T2 Ultra D5303

The Sony Xperia T2 Ultra D5303 is given an honor to taste what's offered by crDroid (Tianchi) custom ROM, aside from Android 5.1.1 Lollipop based this non-stock software has its own features and goodies that will probably make you feel amazed. Sony itself has not unleashed the 5.1.1 Lollipop series to the handset to which make this ROM is so tempting for the users.

Advertisements.

Well this all thanks to the Davidteri91, as the developer of the ROM also as the recognized member of XDA that makes this awesomeness comes to us. You are invited to give crDroid Android 5.1.1 Lollipop ROM a try and flash it on your own beloved Sony Xperia T2 Ultra using a custom recovery such as CWM, TWRP, Philz or any other you prefer most.

And in this post will try to guide you through the entire process of flashing the ROM to your Xperia T2 Ultra phone and you will end up enjoying every feature offered by it and if you like you can set it to be your own daily driver, and tell your friend about it, who knows they probably would flash it too to their devices.

Advertisements.

Preconditions.

• Surely your warranty will be voided to flash this non-stock software.
• crDroid is an AOSP based ROM therefore you need to set your phone's bootloader unlocked.
• Have already installed CWM or TWRP to your phone that's needed to flash the ROM zip file.
• Unfortunately crDroid is not armed with Gapps by default, thus you will need to install it separately.
• Sony will not approve installing this firmware, and of course the ROM was not released by Sony, instead by third-party developer.
• Your device should already be rooted.
• Enable your Sony Xperia T2 Ultra D5303 debugging mode first.
• Prepare your computer and USB cable because we need them to transfer the zip files (ROM and Gapps) to your phone later.

Perform the manual instructions here at your own risk, none should be held responsible for bricks or damages which may happen to your phone, all the responsible are yours to hold. Blame none but yourself if that really happen.

Are you ready? Then let's do it guys. Come on guys!

How to install crDroid Android 5.1.1 Lollipop firmware on Sony Xperia T2 Ultra D5303

Download the files below to your PC.

• Download crDroid Android 5.1.1 Lollipop ROM.
• Download Gapps for Android 5.1.1 Lollipop.

You do not need to unzip all the files above after you finished downloading them to your computer.

Instructions.

1. Transfer all the zip files to your smartphone's internal storage from your computer (Connect your smartphone to computer to transfer the zip files).
2. When all zip files transferred you can now disconnect your phone from PC.
3. Shut down your phone now to boot into the recovery mode; Volume UP + Home + Power.
4. In the CWM recovery or other custom recovery, you need to firstly select Wipe Data/Factory Reset.
   
   
5. Afterward you need to choose the Wipe Cache Partition. When done, you need to also choose the Wipe Dalvik Cache in Advanced Menu.
   
   
   
   
   
6. You need now selecting the Install Zip From SD Card -> Choose Zip From SD Card then find the crDroid zip file you previously transferred to your phone's internal storage.
   
   
   
   
   
7. Do the above step again to flash the Gapps zip file.
8. Once you've done all the tasks above, you need to *****Go Back***** -> Reboot System Now.
   
   
9. Now your Sony Xperia T2 will reboot, the rebooting process will be longer than usual, as it will load a new software and Gapps.

Congratulation guys because you just finished installing crDroid (Tianchi) Android 5.1.1 Lollipop ROM on Sony Xperia T2 Ultra D5303 smartphone. You should be happy now. And see you again in the next posts of Install Android ROM blog.

G920T1UVU2COF9 (UVU2COF9) Android 5.1.1 Update For T-Mobile Samsung Galaxy S6 SM-G920T1

G920T1UVU2COF9 (UVU2COF9) Android 5.1.1 Lollipop update was recently released to serve the T-Mobile Samsung Galaxy S6 SM-G920T1 phone in the USA. Samsung delivers this official release to fix some bugs and increase the performance of the said device. So you are highly recommended to immediately take the software right away.

Advertisements.

To do so you can utilize the automatic update features such as Samsung KIES or OTA (System Update) provided directly on your smartphone in About phone section. However waiting its coming to the said features usually take time, could be days or weeks, if you dislike to wait that long then you can go for the manual installations.

And the post you are reading now providing a how to guides to bring the G920T1UVU2COF9 (UVU2COF9) Android 5.1.1 Lollipop on T-Mobile Galaxy S6 phone. The result will be exactly the same with using KIES or OTA, the difference is only it's a manual process that takes time more than the automatic.

Preconditions.

• Flash the G920T1UVU2COF9 (UVU2COF9) Android 5.1.1 Lollipop firmware only if you own a T-Mobile Samsung Galaxy S6 SM-G920T1. Do not try it on any other model. Okey?
• In case you have a rooted Samsung Galaxy S6 then this firmware will restore to the original stock firmware, that means your root will be gone.
• If your Samsung Galaxy S6 is powered with a custom ROM, then this firmware will erase the system partitions of your existing ROM.
• Make sure you enable Android USB debugging mode on Samsung Galaxy S6.
• Odin will be used to flash the firmware file, therefore your Windows computer, USB cable and USB drivers should be ready to use.
• Disable your KIES and antivirus program temporarily to avoid them preventing Odin from running.
• Your Samsung Galaxy S6 battery power should be sufficient to perform this action.
• Make backup first.
• Samsung KIES will continue recognizing your Samsung Galaxy S6 after the firmware successfully flashed.

Great! Considering you have read all the points listed in the preconditions section, now we can continue to install G920T1UVU2COF9 (UVU2COF9) Android 5.1.1 Lollipop firmware on the T-Mobile Samsung Galaxy S6 SM-G920T1.

Perform the flashing procedures below and all the risks are yours to bear.

Now you need to download the following files to your own computer.

• Download G920T1UVU2COF9 (UVU2COF9) Android 5.1.1 Lollipop firmware.
• Download Odin3 v3-07 (Do not need to download it if you already have it on your PC).

Do not forget to unzip all the files above after they are fully downloaded to your computer.

Advertisements.

How to install G920T1UVU2COF9 (UVU2COF9) Android 5.1.1 Lollipop on T-Mobile Samsung Galaxy S6 SM-G920T1

1. Power off your T-Mobile Samsung Galaxy S6 SM-G920T1 completely to access the Download Mode. Now press and hold these three buttons at the same time; Volume Down + Home + Power.
2. Keep them pressed till the following warning shows up, then press Volume Up to access the Download Mode.
   
   
3. Open Odin now by clicking the exe file.
   
   
4. Connect your smartphone to PC using your USB cable.
5. Odin will then display Added!!! notification telling you it has detected your smartphone.
   
   
6. Click the AP (For Odin3 v3.09) or click the PDA (For Odin3 v3.07) button to get the firmware file you saved and unzipped on your computer earlier.
   
   
7. To begin the installation just click the Start button on Odin.
   
   
8. Odin will display PASS notification telling you that it has fully flashed the G920T1UVU2COF9 (UVU2COF9) Android 5.1.1 Lollipop firmware on your Samsung Galaxy S6 smartphone.
   
   
9. You can now reboot your smartphone.

Fix bootloop and other errors.

In case your smartphone is stuck at animation logo or bootloop, just enter to recovery mode then perform a factory reset procedure.

N915VVRU2BOF2 (VRU2BOF2) Android 5.0.1 Lollipop Update For Verizon Samsung Galaxy Note Edge SM-N915V

The Verizon Samsung Galaxy Note Edge SM-N915V gets an official update now after Samsung recently released N915VVRU2BOF2 (VRU2BOF2) that comes with Android 5.0.1 Lollipop firmware with several bug-fixes and improvements to keeps the handset run the best possible to serve the need of the users.

Advertisements.

If you have the smartphone in hand then you could probably have seen its availability on either Samsung KIES or System Update (OTA) directly from your smartphone. So you can immediately install the firmware right away automatically. But of course you have fully understood that sometimes the official firmware needs time to reach the said automatic update features.

So if you have not being notified through OTA or Samsung KIES, then you can follow the manual instructions here to install N915VVRU2BOF2 (VRU2BOF2) Android 5.0.1 Lollipop firmware on Samsung Galaxy Note Edge SM-N915V phone. And the process is pretty simple. If you are interested then you can start it from reading the following preconditions telling you what to do.

Preconditions.

• Do not install the N915VVRU2BOF2 (VRU2BOF2) Android 5.0.1 Lollipop firmware if your handset it's not the Verizon Samsung Galaxy Note Edge SM-N915V.
• If your handset is rooted, then this firmware will wipe it out.
• Those who use a custom ROM, then this firmware will erase its system partition cache.
• Do not forget to firstly enable Android USB debugging mode of your Samsung Galaxy Note Edge device first.
• We will use Odin to flash the firmware, therefore prepare your Windows based computer, USB cable and already installed USB drivers.
• Be sure to disable your Samsung KIES and antivirus program temporarily because these kind of apps will try to prevent Odin from running, re-enable them when the firmware upgrading process done, okey?
• Make sure your battery power is not less.
• Backup, backup, backup your data first guys.
• Your phone will be recognized by Samsung KIES for installing this firmware.

Since you've done reading the entire points from preconditions section it's time to flash the N915VVRU2BOF2 (VRU2BOF2) Android 5.0.1 Lollipop on the Verizon Samsung Galaxy Note Edge SM-N915V.

Remember all the risks are yours to take, so do it at your own risk, good luck guys.

Now download the following files to your computer.

• Download N915VVRU2BOF2 (VRU2BOF2) Android 5.0.1 Lollipop firmware.
• Download Odin3 v3-07.

Remember. To extract / unzip them all when they're fully downloaded to your computer. Do not forget that guys.

Advertisements.

How to install N915VVRU2BOF2 (VRU2BOF2) Android 5.0.1 Lollipop on Verizon Samsung Galaxy Note Edge SM-N915V

1. Completely shut down your Verizon Galaxy Note Edge SM-N915V to enter to the Download Mode. Press and hold these three buttons simultaneously Volume Down + Home + Power.
2. When you see a warning like this appear on your phone's screen, just use Volume Up for entering the Download Mode.
   
   
3. Launch Odin you previously downloaded to your computer.
   
   
4. Then connect your Samsung Galaxy Note to computer.
5. Odin will show Added!!! as a notification indicating it has detected your device.
   
   
6. Click the AP (For Odin3 v3.09) or click the PDA (For Odin3 v3.07) button to further find the firmware file you downloaded and unzipped to your PC.
   
   
7. Click on Start button to start the firmware installation.
   
   
8. When Odin has done installing the N915VVRU2BOF2 (VRU2BOF2) firmware, it will show a PASS notification indicating the firmware was successfully installed to your phone.
   
   
9. Now you can reboot your phone.

Fix bootloop and other errors.

Perform a factory reset if your phone doesn't boot into normal mode. Just enter to recovery mode and you need to choose Wipe Data / Factory Reset option. And done guys. Congratulation.

Update AT&T Samsung Galaxy S6 SM-G920A To CleanROM 1.1 [UCU1AOE2] Android 5.0.2

Here you will learn on how to install CleanROM 1.1 [UCU1AOE2] Android 5.0.2 custom ROM on AT&T Samsung Galaxy S6 SM-G920A phone, this post is elaborating the complete steps to do so if you wish to install the said custom ROM then you are at the right place to do so.

Advertisements.

Having a custom ROM is like an adventure, because we will use a software that's not developed by the device manufacture, instead the result of the Android users that are concern to add things that are absent on the stock firmware. They are users, known third-party developers, they could create their own ROM on their rooms or their office desks.

It's like taking a risk because we take the software from people we don't know living far from our content. But finally after several hours of using the ROM, we like it, then set it to be our daily driver. Isn't that amazing? You ignore the stock software to use a non-stock ROM.

Preconditions.

• Backup your existing data is the first act you must do before doing anything unofficial like flashing a custom ROM.
• CleanROM requires you to flash a custom recovery like CWM or TWRP. I use CWM in this guide.
• Your phone should already be rooted.
• This CleanROM is an AOSP based ROM therefore you need to unlock your bootloader of your smartphone.
• CleanROM has nothing to do with Samsung, your device warranty will be nullified for flashing this ROM, you will pay for technical services in the future.
• Enable Android USB debugging mode of your Samsung Galaxy S6 first.
• There is no Gapps here, therefore we will install it separately, the files will be provided below.
• A computer and a USB cable.
• Enough battery power.

Do it at your own risk, blame none if anything run incorrectly, you are responsible.

Install CleanROM 1.1 [UCU1AOE2] Android 5.0.2 Lollipop custom ROM on AT&T Samsung Galaxy S6 SM-G920A

Download all the files provided below to your computer.

• Download CleanROM 1.5 [OE2 OTA].
• Download Gapps.

All the files you downloaded above, do not need to be unzipped or extracted, leave them intact.

Advertisements.

Instructions.

1. Connect your Samsung Galaxy S6 to computer, then transfer zip files to your smartphone's internal storage.
2. When all the files transferred just disconnect your phone from computer.
3. Shut down your Galaxy S6, then boot into the recovery mode, use the Volume UP + Home + Power buttons (Hold and press them together).
4. Inside the recovery mode (CWM or TWRP), select Wipe Data/Factory Reset option.
   
   
5. Then choose the Wipe Cache Partition option. Then go to Advanced mode then choose the Wipe Dalvik Cache option.
   
   
   
   
   
6. Now it's time to flash the zip files (ROM and Gapps zip files), choose Install Zip From SD Card -> Choose Zip From SD Card to grab the the CleanROM 1.5 zip file on your phone's internal storage and then flash it right guys.
   
   
   
   
   
7. Perform the above step again to flash Gapps zip file.
8. When the zip files above flashed successfully, then *****Go Back***** -> Reboot System Now.
   
   
9. Done, your smartphone will take reboot, just wait.

Awesome my friend because your AT&T Samsung Galaxy S6 is now powered with Android 5.0.2 Lollipop CleanROM 1.5 [UCU1AOE2] ROM. If you like this post, why don't you share it to your Google Plus, Twitter and Facebook friends. And see you again in the posts of Install Android ROM blog.